ADSL2 Gateway with 4-Port Switch
Factory Defaults
Restore Factory Defaults. If you wish to restore the Gateway to its factory default settings and lose all your settings, click Yes.
To begin the restore process, click the Save Settings button to save these changes, or click the Cancel Changes button to undo your changes.
Firmware Upgrade
The ADSL Gateway allows you to upgrade firmware for the LAN (network) side of the Gateway.
Upgrade from LAN
To upgrade the Gateway’s firmware from the LAN:
1.Click the Browse button to find the firmware upgrade file that you downloaded from the Linksys website and then extracted.
2.
Chapter 5: Configuring the Gateway
Figure 5-34: Factory Defaults
Figure 5-35: Firmware Upgrade
35
The Administration Tab