ADSL2 Gateway with |
|
• Key Life Time. In the Key Lifetime field, you may optionally select to have the key expire at the end of a time |
|
period of your choosing. Enter the number of seconds you’d like the key to be used until a |
|
between each endpoint is completed. |
|
Phase 2 |
|
• Encryption. The encryption method selected in Phase 1 will be displayed. |
|
• Authentication. The authentication method selected in Phase 1 will be displayed. |
|
• PFS. The status of PFS will be displayed. |
|
• Group. There are two |
|
cryptographic technique that uses public and private keys for encryption and decryption. |
|
• Key Life Time. In the Key Lifetime field, you may select to have the key expire at the end of a time period of |
|
your choosing. Enter the number of seconds you’d like the key to be used until a |
|
each endpoint is completed. |
|
Other Setting |
|
• NetBIOS broadcast. Check the box next to NetBIOS broadcast to enable NetBIOS traffic to pass through the |
|
VPN tunnel. |
|
• | Figure |
sequence numbers as packets arrive, ensuring security at the IP |
|
• |
|
disconnected, then the Gateway will automatically |
|
• Check this box to block unauthorized IP addresses. Enter in the field to specify how many times IKE must fail |
|
before blocking that unauthorized IP address. Enter the length of time that you specify (in seconds) in the |
|
field. |
|
When finished making your changes on this tab, click the Save Settings button to save these changes, or click |
|
the Cancel Changes button to undo your changes. For further help on this tab, click the Help button. |
|
Chapter 5: Configuring the Gateway | 26 |
The Security Tab