Linksys AG241 manual Tunnel 2 Router-win, Figure B-16 Tunnel Setting Tab

ADSL2 Gateway with 4-Port Switch

7.Select the Tunnel Setting tab, shown in Figure C-16, and click The tunnel endpoint is specified by this IP Address radio button. Then, enter the Router’s WAN IP Address.

8.Select the Connection Type tab, as shown in Figure C-17, and click All network connections. Then, click the OK or Close button to finish this rule.

Tunnel 2: Router->win

9.In the new policy’s properties screen, shown in Figure C-18, make sure that “win -> Router” is selected and deselect the Use Add Wizard check box. Then, click the Add button to create the second IP filter.

Appendix B: Configuring IPSec between a Windows 2000 or XP Computer and the Gateway

Figure B-16: Tunnel Setting Tab

Figure B-17: Connection Type Tab

Figure B-18: Properties Screen

59

How to Establish a Secure IPSec Tunnel