NETGEAR manual HDX101 Powerline HD Ethernet Adapter User Guide

HDX101 Powerline HD Ethernet Adapter User Guide

To reset all the devices in your network to the factory defaults, proceed as follows:

1.For each remote device in your network, click the device name to highlight it.

Note: Because only one device in a system can be reset at a time, the checkboxes are not used to select devices for this type of operation.

Select remote devices first

Select device by highlighting the device name, not by setting a checkmark

Figure 2-19

a.Click the Factory Reset button. The software will display a message similar to the following:

Figure 2-20

Installing the Powerline HD Ethernet Adapter 2-15

v1.2, February 2007