4.11 Power switch board | 4 Replacement Procedures |
4.11 Power switch board
Removing the Power switch board
The following describes the procedure for removing the power switch board (See Figure 4- 23).
1. Remove the following screw and power switch board.
• M2.5⋅4B FLAT HEAD screw ⋅1
2. Disconnect the power switch cable from the connector on the power switch board.
M2.5x4B FLAT HEAD |
| Power switch board |
|
Power switch cable
Guide
Guide
Figure 4-23 Removing the power switch board
QOSMIO G50 Maintenance Manual | [CONFIDENTIAL] |
