Toshiba G50 manual Replacement Procedures 21 MDC, Removing the MDC

4 Replacement Procedures 4.21 MDC

4.21 MDC

Removing the MDC

The following describes the procedure for removing the MDC (See Figure 4-39).

1. Remove the following screws securing the MDC.

• M2.0⋅4B BIND screw ⋅2

2.Lift the MDC straight above to remove it from the connector CN3010 on the system board.

3.Disconnect the modem cable from the connector on the MDC.

M2.0x4B BIND Modem cable

MDC

CN3010

Figure 4-39 Removing the MDC

4-62 [CONFIDENTIAL] QOSMIO G50 Maintenance Manual (960-683)