4.16 Wireless LAN card | 4 Replacement Procedures |
4.16 Wireless LAN card
Removing the wireless LAN card
The following describes the procedure for removing the wireless LAN card (See Figure
1.Disconnect the wireless LAN antenna cables from the terminals on the wireless LAN card.
2.Remove the following screws securing the wireless LAN card.
• M2.0⋅3C | BIND screw | ⋅2 |
3. Disconnect the wireless LAN card from the connector CN2600 on the system board.
M2.0x3C BIND
Wireless LAN card
CN2600 | Wireless LAN antenna cable |
|
Figure 4-33 Removing the wireless LAN antenna cable (three antenna cables)
QOSMIO G50 Maintenance Manual | [CONFIDENTIAL] |
