Toshiba G50 manual Back cover Replacement Procedures, Installing the Back cover

4.17 Back cover 4 Replacement Procedures

Installing the Back cover

The following describes the procedure for installing the back cover (See Figure 4-35). 1. Set the back cover under the guide of the base assembly.

NOTE: When setting the back cover, be careful not to pinch the DC-IN jack cable and right LED cable.

2. Secure the back cover with the following screws.
• M2.5⋅6B	FLAT HEAD screw	⋅4

QOSMIO G50 Maintenance Manual (960-683) [CONFIDENTIAL] 4-55