Toshiba G50 manual Replacement Procedures 30 USB/Jack board, Installing the USB/Jack board

4 Replacement Procedures 4.30 USB/Jack board

3.Disconnect the USB cable from the connector CN6510 on the back of USB/jack board.

USB cable

CN6510

Figure 4-59 Removing the USB/jack board (2)

Installing the USB/Jack board

The following describes the procedure for installing the USB/jack board (See Figure 4-58 and 4-59).

1.Connect the USB cable to the connector CN6510 on the back of USB/jack board.

2.Connect the jack board cable to the connector CN6511 on the system board.

3.Set the USB/jack board to the slot of the base assembly while engaging the hook.

4-90 [CONFIDENTIAL] QOSMIO G50 Maintenance Manual (960-683)