![](/images/new-backgrounds/1266410/266410549x1.webp)
4.14 Touch pad/Fingerprint sensor board/LED board | 4 Replacement Procedures | |||
7. | Remove the following screws and separate the LED board and touch pad plate. | |||
| • | M2.5⋅2.8B | FLAT HEAD screw | ⋅2 |
8. | Remove the following screw and separate the LED board and plate. | |||
| • | M2.5⋅2.8B | FLAT HEAD screw | ⋅1 |
M2.5x2.8B FLAT HEAD
Touch pad plate
LED board
Plate
Figure 4-29 Removing the LED board
QOSMIO G50 Maintenance Manual | [CONFIDENTIAL] |