Toshiba G50 manual Replacement Procedures VGA fin/VGA/SPURS fin/SPURS

4 Replacement Procedures 4.25 VGA fin/VGA/SPURS fin/SPURS

4.25 VGA fin/VGA/SPURS fin/SPURS

Removing the VGA fin/VGA/SPURS fin/SPURS

The following describes the procedure for removing the VGA fin/VGA/SPURS fin/SPURS (See Figure 4-44 to 4-46).

Procedures 1 to 4 are for external VGA (GM45 or NB9M/9P) and SPURS model. Procedures 5 to 6 are for external VGA (NB9E) model.

1.Remove the following screws securing the VGA holder/VGA fin/SPURS holder/SPURS fin.

• M2.0⋅4B BIND screw ⋅6

2.Remove the VGA holder/VGA fin/SPURS holder/SPURS fin.

3.Disconnect the SPURS cable from the connector CN2801 on the system board and connector CN7901 on the SPURS.

M2.0x4B BIND

M2.0x4B BIND

SPURS cable

CN2801

CN7901

SPURS holder

VGA holder

VGA fin

SPURS fin

Figure 4-44 Removing the VGA fin/ SPURS fin

4-72 [CONFIDENTIAL] QOSMIO G50 Maintenance Manual (960-683)