4 Replacement Procedures 4.27 Speaker
4-86 [CONFIDENTIAL] QOSMIO G50 Maintenance Manual (960-683)
Installing the speaker
The following describes the procedure for installing the speaker (See Figure 4-52 to 4-55).
1. Set the right speaker/woofer to the slot.
2. Arrange the USB/jack board cable under the guides in place.
3. Arrange the right speaker/woofer cable under the guides in place and stick the glass
tape.
4. Set the left speaker to the slot.
5. Set the left LED and secure it with the following screw.
• M2.0×4B FLAT BIND screw ×1