Toshiba G50 manual Wake-up on LAN function whenoperating from the battery

3 Tests and Diagnostics 3.31 SETUP

or BackSpace. Press ↓ to move the cursor to the right and ↑ to move the cursor to the left when you set the date and time.

For the Alarm Time, set the time to turn on the power automatically. The “second” cannot be set. When it is set to “Disabled”, the time to turn on automatically is not set.

The Wake-up on LAN is a function to turn on the power automatically by the call from the administrator. It can be set to “Enabled” only when “Built-in LAN” is set to “Enabled”. To activate this function, use the AC adapter.

On Battery

The following settings can be changed when the Wake-up on LAN is Enabled.

Enabled	Wake-up on LAN function whenoperating from the battery.
Disabled	Wake-up on LAN function whenoperating from the battery
	(Default).

NOTE:

1.Do not remove the AC adaptor and battery pack at the same time when you use this feature. If you do so, data saved by the resume function will be lost. You must also reset this option.

2.If you have set a password and the computer boots by the Auto Power On function and Standby is on, the computer will start with the instant security function enabled. The password = message is not displayed; however, you must enter the password to use the computer.

3.This option is enabled only once, the setting is reset, after booting up.

(f)Critical Battery Wake-up

Configures what action is taken when the remaining battery power is close to running out while the system is in Sleep Mode.

This setting is only available when the Critical battery action in Windows is set to Hibernate (Default).

To access it, Start -> Control Panel -> System and Maintenance ->

Power Options -> Edit Plan Settings -> Change advanced power settings -> Battery.

The operation of this function is dependent upon battery status.

Enabled	When the remaining battery power is about to run out while
	the system is in Sleep Mode, the system is automatically
	woken up and then switched to Hibernation Mode
	(Default).
Disabled	No action is taken even if the remaining battery power is
	about to run out while the system is in Sleep Mode.

3-88 [CONFIDENTIAL] QOSMIO G50 Maintenance Manual (960-683)