4.9 Cover assembly | 4 Replacement Procedures |
4.Turn over the computer and open the display.
5.Peel off the insulator (HNS HLD KB INSULATOR) and disconnect the camera/microphone cable and Bluetooth cable from the connector CN9550 and CN4400 on the system board.
6.Disconnect the touch sensor cable, power switch cable, volume cable and touch pad SW/LED cable from the connector CN9650, CN3300, CN3330 and CN3240 on the system board.
Insulator | Bluetooth cable |
Camera/microphone cable | (connected to CN4440) |
(connected to CN9550) |
|
Touch sensor cable | Touch pad SW/ |
(connected to CN9650) | LED cable |
| (connected to CN3240) |
Power switch cable (connected to CN3300)
Volume cable (connected to CN3330)
Figure 4-19 Removing the cover assembly (3)
QOSMIO G50 Maintenance Manual | [CONFIDENTIAL] |
