Toshiba G50 manual Removing the HDD-2, Installing the HDD

4 Replacement Procedures		4.4 HDD
9. Remove the following screws and separate the HDD holder-2and HDD-2.
• M3.0⋅4C	FLAT HEAD screw	⋅4

HDD-2

M3.0x4C FLAT HEAD

HDD holder-2

M3.0x4C FLAT HEAD

Figure 4-8 Removing the HDD-2

Installing the HDD

The following describes the procedure for installing the HDD (See Figure 4-5 to 4-8).

1. Set the HDD-2to the HDD holder-2and secure them with the following screws.

• M3.0⋅4C FLAT HEAD screw ⋅4

2. Set the HDD-1to the HDD holder-1and secure them with the following screws.

• M3.0⋅4C FLAT HEAD screw ⋅4

NOTE: Although they are M3.0 head screws, screw torque must be set in 0.294 N·m (3.0Kgf·cm) for four screws securing the HDD holder.

3.Connect the HDD-2 assembly to the connector of the HDD-2 cable and set the HDD-2 assembly into the HDD-2 slot.

4.Set the HDD-2 cover to the slot and secure it with the following screw.

4-18 [CONFIDENTIAL] QOSMIO G50 Maintenance Manual (960-683)