Toshiba G50 manual Replacement Procedures Internal microphone/Camera module

4 Replacement Procedures 4.36 Internal microphone/Camera module

Installing the Internal microphone/Camera module

The following describes the procedure for installing the internal microphone/camera module (See Figure 4-71 to 4-74).

1.Set the internal microphone into the microphone holder and arrange the camera/microphone cable along/under the guides of the LCD cover in place.

2.Connect the camera/microphone cable to the connector on a new camera module and set the camera module to the LCD cover.

NOTE: Do not reuse the removed camera module. Be sure to use a new camera module.

3.Stick the glass tapes in place.

4.Set the LCD support plate (up) to the LCD cover and secure it with the following screws.

• M2.0⋅4B S-THIN HEAD screw ⋅2

4-110 [CONFIDENTIAL] QOSMIO G50 Maintenance Manual (960-683)