Toshiba G50 manual Built in HDD2→Built in HDD1→USB

3 Tests and Diagnostics 3.31 SETUP

(b)HDD Priority

Use this option to set the booting priority from HDD or USB. Built in HDD1→Built in HDD2→USB (Default)

:detecting boot-command from Built in HDD1

Built in HDD2→Built in HDD1→USB

:detecting boot-command from Built in HDD2

Built in HDD1→USB→ Built in HDD2

:detecting boot-command from Built in HDD1

Built in HDD2→USB →Built in HDD1

:detecting boot-command from Built in HDD2

USB →Built in HDD1→ Built in →HDD2

:detecting boot-command from USB

USB →Built in HDD2→ Built in HDD1

:detecting boot-command from USB 2

NOTE: When 2nd HDD is not installed, this option does not appear in the menu.

If the boot command can not be detected from the prior HDD, booting target changes to other devices. (Not detected from the other one)

6.Others

Whether or not you need to configure the computer with these options depends primarily on the kind of software or peripherals you use.

(a)Core-Multi Processing

The Core Multi-Processing sets the CPU operating mode.

The configuration for the Core Multi - Processing is carried out in the BIOS setup program.

Enabled is Dual Core mode. Disabled is Single Core mode.

Enabled	Enables Core Multi-Processing functions. (Default)
Disabled	Disables Core Multi - Processing functions.

(b) Dynamic CPU Frequency mode

3-86 [CONFIDENTIAL] QOSMIO G50 Maintenance Manual (960-683)