4 Replacement Procedures | 4.20 Wireless USB card |
4.20 Wireless USB card
Removing the Wireless USB card
The following describes the procedure for removing the wireless USB (See Figure
1.Disconnect the wireless USB antenna cable from the connector on the wireless USB.
2.Remove the following screws securing the wireless USB.
• M2.0⋅3C BIND screw⋅2
3. Remove the wireless USB card from the connector CN2700 on the system board.
M2.0x3C BIND
Wireless USB antenna cable
CN2700
Wireless USB card
Figure 4-38 Removing the wireless USB card
[CONFIDENTIAL] | QOSMIO G50 Maintenance Manual |