Toshiba G50 manual Installing the optical disk drive

4 Replacement Procedures 4.8 Optical disk drive (DVD-super multi drive)

Installing the optical disk drive

The following describes the procedure for installing the optical disk drive (See Figure 4-14 to 4-16).

1.Set the ODD rear bracket to the optical disk drive and secure them with the following screws.

• M2.0⋅2.7C Unique screw ⋅2

2.Set the ODD side bracket to the optical disk drive and secure them with the following screw.

• M2.0⋅3C S-THIN HEAD screw ⋅1

3.Set the optical disk drive to the slot of the cover assembly and secure them with the following screw.

• M2.5⋅6B FLAT HEAD screw ⋅1

4.Turn the computer face up and open the display.

5.Secure the optical disk drive with the following screw.

• M2.5⋅6B FLAT HEAD screw ⋅1

CAUTION: When the optical disk inside the optical disk drive can not be ejected because of some failure, open the disc tray by inserting a slender object (about 15

mm)such as a straightened paper clip into the eject hole near the eject button.

4-28 [CONFIDENTIAL] QOSMIO G50 Maintenance Manual (960-683)