
4 Replacement Procedures4.35 LCD unit/FL inverter
4.35 LCD unit/FL inverter
Removing the LCD unit/FL inverter
The following describes the procedure for removing the LCD unit/FL inverter (See Figure 4- 66 to
1. | Peel off six LCD cushions (up and low) and remove the following screws. | |||
| • | M2.5⋅6B | FLAT HEAD screw | ⋅4 |
| • | M2.5⋅8B | FLAT HEAD screw | ⋅2 |
2. | Remove the LCD mask while releasing the latches. |
|
M2.5x6B FLAT HEAD (Under the LCD cushion up)
LCD mask
M2.5x8B FLAT HEAD (Under the LCD cushion low)
Figure 4-66 Removing the LCD mask
[CONFIDENTIAL] | QOSMIO G50 Maintenance Manual |