NETGEAR CA 95054 manual Front Panel, Status Light Descriptions

NETGEAR Router Setup Manual

The Front Panel

The front panel of the router includes these status lights.

Figure 2-1: router Front Panel

You can use the status lights to verify connections. Viewed from left to right, the table below describes the lights on the front panel of the router.

Table 2-1.	Status Light Descriptions
Label	Activity	Description
Power	On Green Solid	Power is supplied to the router.
	Off	Power is not supplied to the router.
Test	Blinking	The router is performing its diagnostic test.
	Off	The router successfully completed its diagnostic test.
Internet	On	The Internet port has detected a link with an attached device.
	Blink	Data is being transmitted or received by the Internet port.
LAN	On (Green)	The LAN (local area network) port has detected link with a 100 Mbps
	Blink (Green)	device.
		Data is being transmitted or received at 100 Mbps.
	On (Yellow)	The Local port has detected link with a 10 Mbps device.
	Blink (Yellow)	Data is being transmitted or received at 10 Mbps.
	Off	No link is detected on this port.
2-2		Getting to Know Your NETGEAR Wireless Router

August 2004