NETGEAR DG834GV manual V1.0, February

Setup Manual for the DG834GV Integrated ADSL Modem and Wireless Router with Voice

b. After logging in, you will see the menu below.

Figure 1-11

3.Connect to the Internet:

You are now ready to configure your ADSL modem wireless router to connect to the Internet. There are two ways you can configure your ADSL modem wireless router to connect to the Internet:

a.Let the ADSL modem wireless router Setup Wizard auto-detect the type of Internet connection you have and configure it.

b.Manually choose which type of Internet connection you have and configure it.

In either case, use to the configuration parameters your ISP provided to assure that the configuration settings for your Internet connection are correct.

4.Test your Internet connection.

From the bottom of the Setup menu, click Test. If the NETGEAR Web site does not appear within one minute, refer to Chapter 2, “Troubleshooting”.

Your ADSL modem wireless router is now configured to provide Internet access for your network. Your ADSL modem wireless router automatically connects to the Internet when one of your computers requires access. It is not necessary to run a dialer or login application such as Dial-Up Networking or Enternet to connect, log in, or disconnect. These functions are performed automatically by the ADSL modem wireless router as needed.

Connecting the Router to the Internet 1-13

v1.0, February 2006