NETGEAR DGFV338 manual Using a Snmp Manager, VPN Status Data

DGFV338 ProSafe Wireless ADSL Modem VPN Firewall Router Reference Manual

Select VPN from the main menu and Connection Status from the submenu to display the status of IPSec connections. You can change the status of a connection; to either establish or drop the Security Association (SA). Clicking on the VPN Status will show the IPSec Connection status of each VPN tunnel. The field descriptions for the data in the IPSec Connection Status table are in the following Table 6-4.

Figure 6-13

Table 6-4. VPN Status Data

Item	Description
Policy Name	The name of the VPN policy associated with this SA.
Endpoint	The IP address on the remote VPN Endpoint.
Tx (KBytes)	The amount of data transmitted over this SA.
Tx (Packets)	The number of packets transmitted over the SA.
State	The current status of the SA for IKE Policies. The status can be either Not Connected
	or IPSec SA Established.
Action	Click Connect to build the SA (connection) or Drop to terminate the SA (connection).
Poll Interval	Time, in seconds, after which this screen will automatically reload.
Set Interval	Enter a new value in the Poll Interval field and click Set Interval to set a new interval
	value.
Stop	Disables the automatic page refresh feature.

Using a SNMP Manager

Simple Network Management Protocol (SNMP) lets you monitor and manage your router from an SNMP Manager. It provides a remote means to monitor and control network devices, and to manage configurations, statistics collection, performance, and security.

The SNMP Configuration table lists the SNMP configurations by:

6-22 Router and Network Management

v1.0, April 2007