DGFV338 ProSafe Wireless ADSL Modem VPN Firewall Router Reference Manual
b.VPI (Virtual Path Identifier) value: This is provided by your ISP to identify the ATM network (in conjunction with the VCI value).
c.VCI (Virtual Channel Identifier) value: This is provided by your ISP (in conjunction with the VPI value) to identify the ATM network.
3.Click Apply to save your settings.
To configure your Advanced ADSL ISP Settings:
1.Click the Advanced link at the tops of the ADSL ISP Settings screen. The ADSL Advanced Options screen will display.
Figure
2.Enter the MTU Size. The MTU (Maximum Transmit Unit) is the size of the largest packet that can be sent over the network. The standard MTU value for Ethernet networks is usually 1500 Bytes and for PPPoE connections, it is 1492 Bytes. Unless a change is required by your ISP, it is recommended that the MTU values be left as is.
3.Enter the Router's MAC Address. Similar to other Ethernet devices, the router has its own
–If your ISP requires MAC authentication and another MAC address has been previously registered with your ISP, then select either Use this Computer's MAC address to assign the MAC address of the computer through which you are accessing the router.
–Select Use This MAC Address and manually type in the MAC address expected by your ISP.
Basic Installation and Configuration |