NETGEAR DGFV338 manual WEP and WPA/WPA2 Wireless Security Check List Form

DGFV338 ProSafe Wireless ADSL Modem VPN Firewall Router Reference Manual

–If you Enable eXtended Range (XR) Feature, significantly longer range connections than basic 802.11 are maintained through dense barriers (walls, floors, etc.). Faint connections will maintain connectivity due to improved error correction and lowered noise vulnerability.

WEP and WPA/WPA2 Wireless Security Check List Form

For a new wireless network, print or copy this form and fill in the configuration parameters. For an existing wireless network, the person who set up or is responsible for the network will be able to provide this information. Be sure to set the Regulatory Domain correctly as the first step.

•SSID. The Service Set Identification (SSID) identifies the wireless local area network. NETGEAR is the default DGFV338 SSID. However, you may customize it by using up to 32 alphanumeric characters. Write your customized SSID on the line below.

________________________________________________

Note: All wireless nodes in the same network must be configured with the same SSID:

•Authentication. Choose “Shared Key” or above for more security. Circle one:

Open System, Shared Key, Legacy 802.1X, WPA with Radius, WPA2 with Radius, WPA and WPA2 with Radius, WPA-PSK, WPA2-PSK, or WPA-PSK and WPA2-PSK with Radius.

Note: If you selected any of the secure settings—Shared Key or above—the other devices in the network will not connect unless they are set to same Authentication type and have the other required mandatory fields correctly enabled as described previously.

•WEP Encryption Keys. For all four 802.11b keys, choose the Key Size. Circle one: 64, 128, or 152 bits

Key 1: ___________________________________

Key 2: ___________________________________

Key 3: ___________________________________

Key 4: ___________________________________

•WPA-PSK or WPA2-PSK (Pre-Shared Key)

Record the WPA-PSK or WPA2-PSK key. Key: ___________________________________

•WPA or WPA2 RADIUS Settings. For WPA or WPA2, record the following RADIUS settings:

Server Name/IP Address: Primary _________________ Secondary __________________

3-8 Wireless Configuration

v1.0, April 2007