Actiontec electronic WNS100-250 manual Direction, Other Device, Share Folder, Options Schedule

Page 42

Chapter 3 Using the Administrative Utility

Direction

Select the desired direction where backing up will occur here:

•From this NAS to another device - data on the NAS Device is backed up to remote device.

•From another device to NAS - data on remote device is backed up to the NAS Device.

Share

Select the applicable share here. If backing up from the NAS Device, select the share to back up. If backing up to the NAS Device, select the share where the backup-up data will be stored. When the sub-folder text box appears, enter the location of the sub-folder where the share will be stored.

Other Device

Enter the details of the remote device where data will be backed up or stored here.

Name

The name of other device, as seen on the network.

Share Folder

Enter the name of share folder. Depending on the direction of the backup, this is either the share to be backed up or the destination for the backed-up data.

Access the Folder Requires Login

If the share is password protected, click in this check box and enter the Login Name and Password required to gain access to the share.

Options - Schedule

This text box displays the schedule options for when the backup will occur:

39

Image 42

Contents Storage Device Table of Contents This page left intentionally blank Features Introduction1Package Contents System RequirementsTechnical Support Configuring NAS Device Client PC SetupRight-click on the desired share on the Device From the menu that appears, select Map Network Drive… Accessing the NAS Device Tips for Storing Data on the NAS DeviceConfiguring the NAS Device Changing the Password FLASH/USB HDDConfiguring the NAS Device USB Devices Adding a Print ServerConfiguring the NAS Device Page Configuring the NAS Device Page Other Configurations This page left intentionally blank Using Administrative Utility Accessing the Administrative UtilityUsers Using the Administrative Utility Page System Status Page Obtain IP Address Automatically Dhcp Client Wireless SettingsNetwork Settings IP AddressNetwork Mask Gateway RouterSystem Settings Workgroup View Log Page Advanced Setup Existing Groups AccessNew Group CreateTo Remove Access Rights Accessible Share FoldersTo Add Access Rights Group NameOther Users HelpMembers Users To Add a Member to the GroupTo Delete a Member from the Group Shared FoldersDo Not Share Access RightsBrowse NameGroups with Access SaveShare Name When finished, click Close Backup Config BackupOther Groups Click here to delete the selected backup job Backup NowClick here to run the selected backup job immediately ModifyView Log This text box displays a log of completed backup jobsBackup Type Add New JobShare Access the Folder Requires LoginDirection Other DevicePrepare Disk Self-test S.M.A.R.T ScandiskDisk Log CancelStandby Use this to view the results of the last Scandisk operationUpgrade Start UpgradeCurrent Firmware This page left intentionally blank Configuring Wireless Settings Accessing the Wireless SettingsSetting Up Wireless Operation Setting Up Wireless Security Configuring the Wireless SettingsAuthentication Type WEP EncryptionBit WEP key is WPA Pre-Shared Key WPA Group Rekey IntervalWPA Encryption This page left intentionally blank Accessing the NAS Device on the Internet Connecting Via the InternetUsing the Web Browser from the Internet Remote ManagementFTP File Transfer Protocol Troubleshooting Page Solution 3 This can happen in the following situations TroubleshootingThis page left intentionally blank Specifications a Power Input 12VDC 1A LinearRelative Humidity 80% non-condensing Limited Warranty Year Regulatory Compliance Notices ModificationsClass B Equipment Miscellaneous Legal Notices All other names are the property of their respective ownersLimited Warranty Actiontec Electronics, Inc North Mary Avenue Sunnyvale, CA Limited Warranty