Actiontec electronic 56K user manual Product Features, Getting Started

Product Features

This 56K* PnP (Plug-N-Play)† External Call Waiting Modem allows your computer to connect to an ISP supporting V.90 or K56Flex™ protocols (depending on your model). This manual describes the hardware and software installation procedures for your new 56K or external modem.

•Conforms to the ITU-T V.90 specification with auto-negotiation of V.90, V.34, V.32bis, V.32, V.23, V.22bis, V.22, V.21, Bell 212A, and Bell 103 protocols.

•Supports Group 3: class 1 fax protocols.

•V.42bis and MNP 5 data compression. MNP2 - MNP4, V.42, and LAPM error correction.

•Completely controller-based PCI modem for the widest range of supported operating systems: DOS, Windows (3.1x, 95, 98, and NT), OS/2, UNIX, Linux

•Full-duplex

•Call Waiting

*The External 56K Call Waiting Modem is capable of 56K downloads. However, due to FCC rules which restrict the power output of your ISP’s modems, current download speeds are limited to 53K bps. Depending on the conditions of your telephone lines, full 53K bps connections may not be achieved. In these cases, you will achieve speeds up to 53K bps.

†“Plug-N-Play” installation is dependant upon your operating system and computer hardware. Some systems do not support Plug-N- Play.

Getting Started

This package contains:

•External 56K Call Waiting Modem

•User’s Manual

•Voice/Fax Data Communications Software

•serial cable

•telephone cable

•power adapter

•A Bonus Software CD

5