Alcatel-Lucent 740 manual Safety Measures, Preventing Injury

Page 35

Safety Measures

Note: The entire OA-740 documentation set is shipped with each system. These documents can also be downloaded from the Alcatel-Lucent Website.

Step 3: Verify the cards installed.

Verify that the line cards installed in your OA-740 match the card types on the packing list.

Step 4: Have the tools to mount the chassis on the rack.

Keep tools, such as power screw-drivers, screws, cable guides/ties, etc., ready with you for mounting the chassis on the rack.

SAFETY MEASURES

The sections below describe the safety instructions to be followed while using the OA-740.

Note: This equipment has been designed to the highest quality standards of materials, workmanship, and safety. Do not bypass any of the safety features of this equipment or operate this in an improper environment.

PREVENTING INJURY

Warning: Observe the following safety warnings to prevent accidental injury while working with the OA-740.

Follow the guidelines given below to avoid injury while working with the OA-740:

•To avoid injury, be careful when lifting the chassis out of the shipping box.

•Never attempt to rack mount the OA-740 chassis unaided. Ask an assistant to help you for holding the chassis.

•Never operate the OA-740 with exposed power-supply units.

•Never operate the OA-740 if the chassis becomes wet or the area where the chassis installed is wet.

Alcatel-Lucent

OmniAccess 740 Hardware User’s Guide

27

Page 34 Page 36
Image 35
Page 34 Page 36
Contents West Agoura Road OmniAccess 740 Hardware Users GuideCopyright Preface Starting the OmniAccess List of Figures Page List of Tables Page Audience About this GuideChapter Description Document Conventions Safety WarningsDocument Organization Documentation Feedback Obtaining DocumentationReference Publications Obtaining Technical AssistanceAlcatel-Lucent Introduction OmniAccess 740 OverviewOA-740 Overview Package ContentsOA-740 Hardware OverviewOA-740 Chassis OA-740 ChassisParameter Value OA-740 Chassis Physical SpecificationsFront Panel Status Description SE LEDs Slot NumbersLED Status Port or Module Port Type Connect To Cable ConnectionsUser Modules Services EngineLEDs for Ethernet Port on SE Card SE Card LEDsSE Card LEDs Status DescriptionOA7-T1E1-4 T1E1 Port LEDs Port T1E1 Line Card LEDsT1E1 Card LEDs GigE Line Card T1E1 Mode LEDsLEDs for each Port on GigE Card GigE Line Card LEDsGigE Card LEDs LED Interface Serial Line Card V.35/X.21Serial V.35/X.21 Port LEDs Serial Card V.35/X.21 LEDsSerial Card V.35/X.21 LEDs Serial Card V.35/X.21 Cable Part Numbers Serial Card V.35/X.21 Cable DetailsOmniAccess Physical Specifications System SpecificationsEnvironmental Specifications Power SpecificationsInstalling the OmniAccess Required Tools and Equipment Preparing for InstallationInstallation Checklist Preventing Injury Safety MeasuresEquipment Guidelines Lifting Safely Safety with ElectricityPreventing Electrostatic Discharge Damage Environmental Site Requirements Specification Minimum MaximumSite Requirement Guidelines Power Supply Specifications Power Supply OverviewConnecting Power Cord Plant Wiring General Installation RACK-MOUNTING the OA-740 Parts Required Rack Mounting the OA-740 Installing the OA-740IN the RackInstalling Line Cards Installing User ModulesInstalling Fillers Installing Line CardStarting the OmniAccess Starting the OA-740 Checking Conditions Prior to System StartupStarting the OA-740 RJ-45 Console Port Connecting to the System Console PortRJ-45 Connector Console Properties Accessing OA-740 Through CLI Performing Basic Configuration TasksEnable secretpassword 5 password Interface name slot/port Http enabledisable ALUconfig# write mem Connecting to Internal Network Connecting the System to the NetworkOmniAccess Connecting Through SSH RJ-11 Modem Port Connector Connecting Through External NetworkSite LOG Alcatel-Lucent Declaration of Conformity CE Mark Appendix a Regulatory Compliance and Safety InformationWaste Electrical and Electronic Equipment Weee Statement China Rohs Hazardous Substance Table 产品说明书附件Cbfb Telecom SafetyStandards Compliance Manufacturer’s Address Declaration of Conformity AddendumApplication of Council Directives Manufacturer’s NameFCC Class A, Part CISPR22 Class a Warning Canada Class a StatementClass a Warning for Taiwan and Other Chinese Markets Translated Safety Warnings Translated Safety Warnings Battery Warning Español FrançaisRead Important Safety Information Warning Wrist Strap Warning Instrucciones DE Seguridad EN Español Cumple con 21CFR 1040.10 y 1040.11 ó sus equivalentes Alcatel-Lucent Output AC Power Supply SpecificationsDescription Specification Input Environmental CharacteristicsDescription Specification Regulatory compliance RJ-11 Connector Pin Number Signal Name RJ-11 Modem Connector PIN AssignmentsRJ-45 Connector Pin # Signal Name RJ-45 Console Connector PIN AssignmentsPin # Signal Name T1E1 Connector PIN AssignmentsT1E1 Card Port Connector Pin Assignment Pin # 10 Base-T and 100 Base-Tx 1000 Base-Tx Mode SE/L2GE Connector PIN AssignmentsPin# Signal Name Serial Card V.35/X.21 Connector PIN AssignmentsPORT1TXCB P2P3CMODE2 Serial Card V.35 DTE Cable Pin-out

740 specifications

The Alcatel-Lucent 740, also known as the 7400 Series, is a high-performance, versatile platform designed for service providers looking to deliver a wide range of services, including broadband and voice over IP (VoIP). This system is engineered to support the growing demand for bandwidth and the shift towards more data-centric services, catering to both residential and business users.

One of the standout features of the Alcatel-Lucent 740 is its ability to provide advanced routing capabilities. With its robust routing engine, the platform can handle complex tasks such as traffic management and Quality of Service (QoS) optimization. This ensures that the user's experience remains consistent and high quality, even during peak usage times. The precise routing capabilities are critical for applications that require low latency and high reliability, such as video conferencing and online gaming.

The 7400 Series also integrates seamlessly with existing networks, supporting both legacy and modern protocols. This ensures that service providers can transition smoothly to new technologies without losing compatibility with older systems. The platform supports various technologies, including MPLS (Multiprotocol Label Switching), which aids in efficient data traffic handling and improves network performance.

Another important characteristic of the Alcatel-Lucent 740 is its scalability. As service demands grow, the platform can be easily expanded to accommodate increased traffic and new services. This adaptability ensures that providers can invest in their infrastructure with confidence, knowing that the 7400 Series will grow alongside their business needs.

Additionally, the Alcatel-Lucent 740 supports various access technologies, including DSL, fiber optics, and wireless, allowing service providers to offer a range of options to their customers. This flexibility is particularly valuable as it enables providers to tailor their services to the specific needs of different markets.

Furthermore, the platform features an intuitive management interface that simplifies network maintenance and operations. This reduces the operational burden on service providers, allowing them to focus on delivering exceptional service rather than getting bogged down by complex technical challenges.

In conclusion, the Alcatel-Lucent 740 delivers a powerful combination of advanced routing, scalability, and multi-technology support, making it a compelling choice for service providers looking to enhance their service offerings in today's competitive landscape.
Top Page Image Contents