Allied Telesis AT-PWR03 Emission Compliance Statements, Category Approval Agency and Requirement

Page 25

AR750S-DP Secure VPN Router

Emission Compliance Statements

STANDARDS: The AR750S-DP Routers meet the following standards:

Category

Approval Agency and Requirement

 

 

Safety

UL60950-1

 

CAN/CSA-C22.2 No. 60950-1-03

 

EN60950-1

 

AS/NZS 60950.1

 

 

Electromagnetic Compliance

FCC CFR47 Part 15 Class A

 

EN55022 Class A

 

VCCI Class A

 

AS/NZS CISPR22 Class A

 

EN 300 386 pending (for DC configuration only)

 

EN 300 132-2 pending (for DC configuration only)

 

 

Immunity

EN55024

 

 

Network Interface

ISDN Limited Network Protocol Analysis

(where applicable)

FCC Part 68, Subpart D

 

IC CS-03, Issue 8, Part I and IV

 

TBR3

 

TBR4

 

ACA TS031

 

 

U.S. Federal Communications Commission

RADIATED ENERGY

Note: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with this instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Note: Modifications or changes not expressly approved by the manufacturer or the FCC can void your right to operate this equipment.

Canadian Department of Communications

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.

24

Image 25
Contents Installation and Safety Guide Installation and Safety Guide Page Table of Contents Models Covered By This Guide Package ContentsAT-PWR03 AC PSU package contents Installing the RouterSelecting a Site Installing PICs Before installingInstalling the Router in a Rack Installing the Router on a Level Surface AC power supply specifications Using an AT-PWR03Power Supply PSUDC power supply specifications Unpack the power supply unit Installing the Power SupplyInsert the power supply unit into the router For an AT-PWR03 AC power supply Applying Power to the Power SupplyFor an AT-PWR03 DC power supply Secure the power supply unitPlug the supply cable into the router Check that the power supply and cable is not liveSecure the cable Checking the PSU’s status Power the routerConnect the cable to the circuit breaker Disconnect the power to the PSU Removing a Power SupplyRemove the PSU Configure with the Graphical User Interface GUI Configuring the RouterConnect the PC to a router switch port Switch PortsLog in and set the password Hub or Layer 2 SwitchBrowse to the GUI To access context-sensitive help in the GUI Change the default IP addressCustomise the router for your region Initiate router start-up Configure with the Command Line Interface CLIAsyn0 Port Save the configuration Use the CLI to continue configuring the router AR750S-DP Default ConfigurationConnecting the router to your network Connecting Data Cables to the AR750S-DPConnecting to the LAN Connecting a DMZLED LEDs on the AR750S-DPState Function SYSDocumentation and Tools CD-ROM Category Approval Agency and Requirement Emission Compliance StatementsElectrical Notices SafetyLightning Danger Lightning Activity Electrical Type Class 1 EquipmentAchtung Gefährliche Spannung SicherheitGefahr Durch Blitzschlag Netzsicherung VorsichtVorsicht Rahmeneinbau Elektriske Forholdsregler SikkerhedFare Under Uvejr LynaktivitetELEKTRISK-OVERBELASTNING AF Spændingskredsløbet Elektrisk Klasse 1-UDSTYRWaarschuwingen MET Betrekking TOT Elektriciteit VeiligheidGevaar Voor Blikseminslag Elektrische Toestellen VAN KlasseInstallation and Safety Guide Information SUR LES Risques Électriques SécuritéAvertissement Danger D’ÉLECTROCUTION Équipement DE Classe 1 ÉlectriqueInstallation and Safety Guide Sähköön Liittyviä Huomautuksia TurvallisuusSalamaniskuvaara Page Avvertenze Elettriche Norme di SicurezzaPericolo DI Fulmini Page Elektrisitet SikkerhetFare for Lynnedslag Elektrisk Type 1- Klasse UtstyrInstallation and Safety Guide Avisos Sobre Características Elétricas SegurançaAtenção Perigo DE Choque Elétrico Perigo DE Choque Causado POR RaioPage Avisos Electricos SeguridadPeligro DE Rayos Temperatura Requerida Para LA OperaciónInstallation and Safety Guide Tillkännagivanden Beträffande Elektricitetsrisk SäkerhetFara FÖR Blixtnedslag Elektriskt TYP Klass 1 UtrustningInstallation and Safety Guide Connection to mains voltage supply Important Safety InstructionsTelecommunications Interfaces Ports for the connection of other apparatus Connection to Isdn networkTNV1 For the AR021U PIC US Federal Communications Commission FCCRJ49C Allied Telesis International North Creek Parkway #200Canadian Department of Communications
Related manuals
Manual 31 pages 44.01 Kb

AT-PWR03, AR750S-DP specifications

The Allied Telesis AR750S-DP and AR44xS are robust and innovative networking solutions designed to meet the demands of modern enterprises. These devices are designed for performance, scalability, and flexibility, making them ideal for various applications, including data centers, enterprise campus networks, and service provider environments.

The AR750S-DP is a 10GbE (Gigabit Ethernet) routing platform that offers exceptional performance. It features a Dual Power supply option for added reliability, ensuring continuous network operations even in the event of a power failure. This router is equipped with a high-performance CPU and supports advanced routing protocols, making it suitable for both IPv4 and IPv6 environments. The device encompasses features like Quality of Service (QoS), which prioritizes critical applications and ensures optimal bandwidth allocation.

Alongside the AR750S-DP, the AR44xS series serves as a versatile edge router, offering similar performance characteristics. Designed for high-speed broadband access, the AR44xS is particularly effective in delivering reliable internet services. It comes equipped with advanced security features, including embedded firewalls and VPN support, enabling secure remote access and protecting sensitive information from potential threats.

Both models leverage Allied Telesis' innovative technology known as "Multi-layer Switching," which enhances the performance and efficiency of networks by allowing simultaneous data processing at various layers of the OSI model. Additionally, these devices support Layer 3 routing, enabling intelligent traffic management and optimizing data flow across the network.

The AR750S-DP and AR44xS also feature management capabilities that simplify network configuration and monitoring. With support for SNMP (Simple Network Management Protocol), network administrators can easily manage and diagnose network issues, ensuring high availability and performance.

Incorporating Advanced Layer 2 and Layer 3 features, both models facilitate seamless integration into existing network infrastructures, providing scalability that meets the growing demands of businesses. The user-friendly web interface simplifies setup and provides real-time monitoring tools that enhance operational efficiency.

In summary, the Allied Telesis AR750S-DP and AR44xS are advanced networking devices tailored for organizations seeking high-performance, reliable, and secure solutions. With cutting-edge features and comprehensive management capabilities, these routers cater to the diverse needs of modern connectivity, ensuring businesses can thrive in an increasingly digital world.