Allied Telesis AR450S, AR442S, AR441S manual At the log in prompt, enter the login name and password

Page 25

24

AR400 Series Router

2.Log in and set the password.

The login prompt appears on the terminal or PC. If the login prompt does not appear, press [Enter] two or three times.

When the router boots for the first time it automatically creates an account with manager privileges. The account has the login name “manager” and the password is “friend”. Passwords are case sensitive.

At the log in prompt, enter the login name and password.

Login: manager

Password: friend

The router’s command prompt appears and you can now configure the router using the command line interface.

Warning Change the password as soon as possible. Leaving the manager account with the default password is a serious security risk. Make sure you remember the new password as there is no way to retrieve it if it is lost.

Use the following command to change the account password:

set password

3.Configure the router.

See the AR400 Series Router Software Reference for more information on router start-up and configuration procedures (including a list of message definitions). To continue configuring the router using the CLI, use the commands in the Software Reference.

To display a list of help topics, enter:

help

To display help on a specific topic, enter:

help topic

Alternatively, type a question mark (?) at the end of a partially completed command to see a list of valid options.

4.Save the configuration.

Save your configuration to a new file, using the command: create config=filename.cfg

and set the router to load this file when it restarts, using the command: set config=filename.cfg

We recommend leaving the boot.cfg file unchanged, in case you need to revert to the original default configuration.

613-000313 Rev D

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Installation and Safety Guide AR415S AR440S AR441S AR442S AR450S Installation and Safety GuideAR400 Series Router Table of Contents Models Covered By This Guide Package ContentsInstallation and Safety Guide AR440S, AR441S and AR442S Before Installing the Router Installing the AR415SAR415S Router Selecting a SiteRmount Check the supply voltage and the router’s rated voltage Applying Power to the RouterUsing the CLI to configure the AR415S Configuring the AR415SInitiate router start-up Configure the router Log in and set the passwordSave the configuration AR400 Series RouterConnect the PC to a router switch port Using the GUI to configure the AR415SAccess the CLI on the router RouterAssign an IP address to VLAN1 Enable IPBrowse to the GUI Connecting the router to your network Connecting Data Cables to AR415SConnect to the LAN Connect to the WANLED System LEDs on AR415SState Function AR440S, AR441S, AR442S Routers Installing the AR440S, AR441S, AR442SInstalling an Optional PIC Installing the Router in a Rack Installing the Router on a Wall Applying Power to the Router Using the GUI to configure the AR440S, AR441S and AR442S Configuring the AR440S, AR441S, AR442SHub or Layer 2 Switch Switch PortsRouter Log Installation and Safety Guide Set PC to automatic IP addressAdvanced configuration Using the CLI to configure the router At the log in prompt, enter the login name and password Connecting Data Cables to AR440S, AR441S, AR442S Adsl System LEDs on AR440S, AR441S, AR442SShdsl AR450S Router Installing the AR450SInstalling the Router in a Rack Using the CLI to configure the AR450S Configuring the AR450SLog in and set the password Using the GUI to configure the AR450S Enable IP Connect to the DMZ port Connecting Data Cables to the AR450SSystem LEDs on the AR450S Default Configuration on AR440S, AR441S, AR442S Documentation and Tools CD-ROM Connection to mains voltage supply Important Safety InstructionsTelecommunications Interfaces Ports for the connection of other apparatus Connection to Isdn networkTNV1 TNV3Electrical Notices SafetyLightning Danger Lightning Activity Electrical Type Class 1 EquipmentAchtung Gefährliche Spannung SicherheitGefahr Durch Blitzschlag VorsichtElektriske Forholdsregler SikkerhedFare Under Uvejr Lynaktivitet Elektrisk Klasse 1-UDSTYRWaarschuwingen MET Betrekking TOT Elektriciteit VeiligheidGevaar Voor Blikseminslag Elektrische Toestellen VAN KlasseInformation SUR LES Risques Électriques SécuritéAvertissement Danger D’ÉLECTROCUTION Équipement DE Classe 1 ÉlectriqueSähköön Liittyviä Huomautuksia TurvallisuusSalamaniskuvaara Avvertenze Elettriche Norme di SicurezzaPericolo DI Fulmini Elektrisitet SikkerhetFare for Lynnedslag Elektrisk Type 1- Klasse UtstyrAvisos Sobre Características Elétricas SegurançaAtenção Perigo DE Choque Elétrico Perigo DE Choque Causado POR RaioAvisos Electricos SeguridadPeligro DE Rayos Temperatura Requerida Para LA OperaciónTillkännagivanden Beträffande Elektricitetsrisk SäkerhetFara FÖR Blixtnedslag Elektriskt TYP Klass 1 UtrustningRJ49C For the AR021U PICFor the AR440S and AR442S routers RJ11CCanadian Department of Communications Category Approval Agency and Requirement Emission Compliance StatementsStandards The AR450S meets the following standards
Related manuals
Manual 53 pages 24.96 Kb Manual 6 pages 33.2 Kb Manual 11 pages 31.94 Kb

AR440S, AR442S, AR415S, AR441S, AR450S specifications

Allied Telesis offers a range of advanced routers designed to meet the connectivity and operational needs of modern enterprises. Among its extensive lineup, the AR450S, AR441S, AR415S, AR442S, and AR440S models stand out for their robust features and technologies, making them ideal solutions for various networking environments.

The Allied Telesis AR450S is a high-performance router tailored for service providers and large enterprises. It supports advanced routing protocols, including IPv4 and IPv6, ensuring compatibility with both legacy and modern networks. The AR450S boasts substantial throughput capabilities, making it suitable for bandwidth-intensive applications. Its versatile WAN options, including Ethernet and cellular connectivity, allow seamless integration into diverse network architectures.

Next in the lineup is the AR441S, which focuses on providing enhanced security and reliability. With built-in firewall capabilities and VPN support, this model ensures secure communication over the internet. The AR441S also features numerous Ethernet ports for flexible connectivity, enabling organizations to scale their networks as needed. Its user-friendly interface facilitates straightforward configuration and management.

The AR415S is designed for branch offices and small to medium-sized enterprises. This router offers a balance of performance and affordability, equipped with essential features like Quality of Service (QoS) and traffic shaping. The AR415S supports multiple WAN connections, which helps in maintaining reliable internet access by auto-failing to backup connections when necessary.

The AR442S incorporates advanced networking technologies, including dynamic routing protocols and deep packet inspection. This model enhances performance by optimizing traffic flow and improving bandwidth utilization. Its support for VoIP and other multimedia applications makes it an excellent choice for organizations seeking to maximize their communication capabilities.

Lastly, the AR440S is engineered for high availability and redundancy. It includes dual power supplies and hot-swappable components, ensuring that network services remain uninterrupted during maintenance. The AR440S is particularly valuable in mission-critical environments where downtime can lead to significant business disruption.

In summary, the Allied Telesis AR series routers—AR450S, AR441S, AR415S, AR442S, and AR440S—offer a rich set of features tailored to various operational needs. With their advanced routing capabilities, security features, and reliable performance, these routers represent the cutting edge of networking technology for businesses looking to enhance their connectivity and operational efficiency.
Top Page Image Contents