Allied Telesis AR415S, AR442S, AR441S, AR440S Standards The AR450S meets the following standards

Page 54

Installation and Safety Guide

53

STANDARDS: The AR450S meets the following standards:

Category

Approval Agency and Requirement

 

 

Safety

UL60950

 

EN60950

 

AS/NZS 3260

 

 

Electromagnetic Compliance

FCC CFR47 Part 15 Class B

 

EN55022 Class B

 

VCCI Class B

 

AS/NZS CISPR22 Class B

 

 

Immunity

EN55024

 

 

U.S. Federal Communications Commission

RADIATED ENERGY

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment uses, generates and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase separation between the equipment and the receiver.

Connect equipment to an outlet on a circuit different from the receiver.

Consult the dealer or an experienced radio/TV technician for help.

Note: Modifications or changes not expressly approved by the manufacturer or the FCC can void your right to operate this equipment.

Canadian Department of Communications

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada.

613-000313 Rev D

Image 54
Contents Installation and Safety Guide Installation and Safety Guide AR415S AR440S AR441S AR442S AR450SAR400 Series Router Table of Contents Package Contents Models Covered By This GuideInstallation and Safety Guide AR440S, AR441S and AR442S AR415S Router Installing the AR415SBefore Installing the Router Selecting a SiteRmount Applying Power to the Router Check the supply voltage and the router’s rated voltageConfiguring the AR415S Using the CLI to configure the AR415SInitiate router start-up Save the configuration Log in and set the passwordConfigure the router AR400 Series RouterAccess the CLI on the router Using the GUI to configure the AR415SConnect the PC to a router switch port RouterEnable IP Assign an IP address to VLAN1Browse to the GUI Connect to the LAN Connecting Data Cables to AR415SConnecting the router to your network Connect to the WANSystem LEDs on AR415S LEDState Function Installing the AR440S, AR441S, AR442S AR440S, AR441S, AR442S RoutersInstalling an Optional PIC Installing the Router in a Rack Installing the Router on a Wall Applying Power to the Router Configuring the AR440S, AR441S, AR442S Using the GUI to configure the AR440S, AR441S and AR442SSwitch Ports Hub or Layer 2 SwitchRouter Installation and Safety Guide Set PC to automatic IP address LogAdvanced configuration Using the CLI to configure the router At the log in prompt, enter the login name and password Connecting Data Cables to AR440S, AR441S, AR442S System LEDs on AR440S, AR441S, AR442S AdslShdsl Installing the AR450S AR450S RouterInstalling the Router in a Rack Configuring the AR450S Using the CLI to configure the AR450SLog in and set the password Using the GUI to configure the AR450S Enable IP Connecting Data Cables to the AR450S Connect to the DMZ portSystem LEDs on the AR450S Default Configuration on AR440S, AR441S, AR442S Documentation and Tools CD-ROM Important Safety Instructions Connection to mains voltage supplyTelecommunications Interfaces TNV1 Connection to Isdn networkPorts for the connection of other apparatus TNV3Lightning Danger SafetyElectrical Notices Lightning Activity Electrical Type Class 1 EquipmentGefahr Durch Blitzschlag SicherheitAchtung Gefährliche Spannung VorsichtFare Under Uvejr SikkerhedElektriske Forholdsregler Lynaktivitet Elektrisk Klasse 1-UDSTYRGevaar Voor Blikseminslag VeiligheidWaarschuwingen MET Betrekking TOT Elektriciteit Elektrische Toestellen VAN KlasseAvertissement Danger D’ÉLECTROCUTION SécuritéInformation SUR LES Risques Électriques Équipement DE Classe 1 ÉlectriqueTurvallisuus Sähköön Liittyviä HuomautuksiaSalamaniskuvaara Norme di Sicurezza Avvertenze ElettrichePericolo DI Fulmini Fare for Lynnedslag SikkerhetElektrisitet Elektrisk Type 1- Klasse UtstyrAtenção Perigo DE Choque Elétrico SegurançaAvisos Sobre Características Elétricas Perigo DE Choque Causado POR RaioPeligro DE Rayos SeguridadAvisos Electricos Temperatura Requerida Para LA OperaciónFara FÖR Blixtnedslag SäkerhetTillkännagivanden Beträffande Elektricitetsrisk Elektriskt TYP Klass 1 UtrustningFor the AR440S and AR442S routers For the AR021U PICRJ49C RJ11CCanadian Department of Communications Emission Compliance Statements Category Approval Agency and RequirementStandards The AR450S meets the following standards
Related manuals
Manual 53 pages 24.96 Kb Manual 6 pages 33.2 Kb Manual 11 pages 31.94 Kb

AR440S, AR442S, AR415S, AR441S, AR450S specifications

Allied Telesis offers a range of advanced routers designed to meet the connectivity and operational needs of modern enterprises. Among its extensive lineup, the AR450S, AR441S, AR415S, AR442S, and AR440S models stand out for their robust features and technologies, making them ideal solutions for various networking environments.

The Allied Telesis AR450S is a high-performance router tailored for service providers and large enterprises. It supports advanced routing protocols, including IPv4 and IPv6, ensuring compatibility with both legacy and modern networks. The AR450S boasts substantial throughput capabilities, making it suitable for bandwidth-intensive applications. Its versatile WAN options, including Ethernet and cellular connectivity, allow seamless integration into diverse network architectures.

Next in the lineup is the AR441S, which focuses on providing enhanced security and reliability. With built-in firewall capabilities and VPN support, this model ensures secure communication over the internet. The AR441S also features numerous Ethernet ports for flexible connectivity, enabling organizations to scale their networks as needed. Its user-friendly interface facilitates straightforward configuration and management.

The AR415S is designed for branch offices and small to medium-sized enterprises. This router offers a balance of performance and affordability, equipped with essential features like Quality of Service (QoS) and traffic shaping. The AR415S supports multiple WAN connections, which helps in maintaining reliable internet access by auto-failing to backup connections when necessary.

The AR442S incorporates advanced networking technologies, including dynamic routing protocols and deep packet inspection. This model enhances performance by optimizing traffic flow and improving bandwidth utilization. Its support for VoIP and other multimedia applications makes it an excellent choice for organizations seeking to maximize their communication capabilities.

Lastly, the AR440S is engineered for high availability and redundancy. It includes dual power supplies and hot-swappable components, ensuring that network services remain uninterrupted during maintenance. The AR440S is particularly valuable in mission-critical environments where downtime can lead to significant business disruption.

In summary, the Allied Telesis AR series routers—AR450S, AR441S, AR415S, AR442S, and AR440S—offer a rich set of features tailored to various operational needs. With their advanced routing capabilities, security features, and reliable performance, these routers represent the cutting edge of networking technology for businesses looking to enhance their connectivity and operational efficiency.