Allied Telesis AT-AR256E manual Introduction, Main Features

Page 4

1.Introduction

The AT-AR256E 4-Port ADSL Router is the perfect high speed WAN bridge/router. This full- featured product is specifically designed to connect to the Internet, and directly connect to your local area network via high speed 10/100Mbps Ethernet. The ADSL router also has full NAT firewall and DMZ services to block unwanted users from accessing your network.

For gaming users, the ADSL router is already pre-configured for several low latency game ports. Just click on the game you are playing online and the rest is done for you.

The ADSL router is fully compatible with all computers. As long as your computer has a Ethernet interface and is running a TCP/IP stack, the computer can have high speed WAN access. So, plug in the ADSL router (refer to Quick Installation Guide), configure it (per your ISP’s requirements) and enjoy fast Internet access like never before.

1.1Main Features

ADSL/ATM Support

ANSI T1.413 issue 2, ITU-T G.992.1 (G.dmt) and G.992.2 (G.lite) compliant

ADSL2, ADSL2+, RE-ADSL Ready

Rate Adaptive modem at 32Kbps steps

Dynamic Adaptive Equalisation to improve Carrier’s service area

Bridge Tap Mitigation support

ATM Layer with Traffic shaping QoS Support (UBR, CBR, VBR-rt, VBR-nrt)

AAL ATM Attributes – AAL5

Multiple PVC up to 8 support

Spectral compatibility with POTS

F5 OAM Loopback/Send and Receive

Encapsulation Support

RFC2684 Bridge and Routed LLC and VC Mux support

RFC2364 PPPoA Client support

RFC2516 PPPoE Client support

RFC2225/RFC1577 Classical IP Support

Transparent Bridge Support

PAP/CHAP/MS-CHAP for Password Authentication Support

Network Support

Static IP, Dynamic RIP routing support

IP/TCP/UDP/ICMP/ARP/RARP Application Support

Network Address Translation (NAT)

Port Mapping/Forwarding

Easy setup of Port Forwarding rules for popular Games/Application

NAT Application Level Gateway for popular applications

DHCP Server/Relay/client

DNS Relay Agent

DMZ support

Single Session IPsec and PPTP/L2TP VPN pass-through support

PPP Always on with configurable timeout

PPP Dial on Demand

Universal Plug and Play Support

- 4 -

Image 4
Contents Web Interface User Guide Introduction Main Features Your Gateway at a Glance Page Main Features IntroductionManagement Support Ports and Buttons Your Gateway at a GlanceLED Description Installing Your Adsl Router Log into Your Adsl Router Setting Up Your Adsl RouterQuick Start Setup For Advance User Quick StartWide Area Network Connection Configuring the WANLocal Area Network Connection New Connection Bridged Gateway Profile and ConnectionPPPoA Connection Setup PPPoE Connection Setup Dhcp Connection Setup Static Connection Setup Page Modem Setup Configuring the LANModify an Existing Connection Enable/Disable Dhcp Changing the Adsl Router IP Address Static IP Address AssignmentAdvanced For Advance User Only Firewall/NAT ServicesUPnP Port Forwarding UPnPAdvanced Security Enable Web from WAN DMZ ConfigurationEnable Remote Telnet Access Control Enable Incoming Icmp PingLAN Clients MAC Address FiltersMulticast Static Routing Dynamic Routing System Commands ToolsUpdate Firmware User ManagementStatus Ping TestModem Test Network StatisticsConnection Status Dhcp ClientsModem Status Product InformationAppendix a Troubleshooting Adsl Router Is Not FunctionalCan’t Connect To The Adsl Router DSL Link LED Continues To Blink And Does Not StopDSL Link LED Is Always Off What Is a Firewall? Adsl Router Terms