Allied Telesis AT-AR256E manual

Page 35

or other network device where to send data if the target station does not reside on the same subnet as the source. If your machine can reach all stations on the same subnet (usually a building or a sector within a building) but cannot communicate outside of this area, it is usually because of an incorrectly configured default gateway.

- 35 -

Image 35

Contents Web Interface User Guide Introduction Main Features Your Gateway at a Glance Page Introduction Main FeaturesManagement Support LED Description Your Gateway at a GlancePorts and Buttons Installing Your Adsl Router Quick Start Setting Up Your Adsl RouterLog into Your Adsl Router Quick Start Setup For Advance UserLocal Area Network Connection Configuring the WANWide Area Network Connection Bridged Gateway Profile and Connection New ConnectionPPPoA Connection Setup PPPoE Connection Setup Dhcp Connection Setup Static Connection Setup Page Modify an Existing Connection Configuring the LANModem Setup Enable/Disable Dhcp Static IP Address Assignment Changing the Adsl Router IP AddressUPnP Firewall/NAT ServicesAdvanced For Advance User Only UPnP Port ForwardingAdvanced Security Enable Remote Telnet DMZ ConfigurationEnable Web from WAN MAC Address Filters Access ControlEnable Incoming Icmp Ping LAN ClientsMulticast Static Routing Dynamic Routing Tools System CommandsUser Management Update FirmwareNetwork Statistics StatusPing Test Modem TestProduct Information Connection StatusDhcp Clients Modem StatusDSL Link LED Continues To Blink And Does Not Stop Appendix a TroubleshootingAdsl Router Is Not Functional Can’t Connect To The Adsl RouterDSL Link LED Is Always Off Adsl Router Terms What Is a Firewall?