Allied Telesis AT-AR256E manual Installing Your Adsl Router

Page 7

3.Installing Your ADSL Router

1. Locate an optimum location for the ADSL router.

2.For connections to the Ethernet and DSL interfaces, please refer to the Quick Installation Guide.

3.Connect the power adapter. Depending on the type of network, you may want to connect the power adapter to an Uninterruptible Power Supply (UPS). Only use the power adapter supplied with the ADSL router. A different power adapter may damage the product.

Now that the hardware installation is completed, proceed to 4. Setting Up Your ADSL Router

- 7 -

Image 7
Contents Web Interface User Guide Introduction Main Features Your Gateway at a Glance Page Introduction Main FeaturesManagement Support Ports and Buttons Your Gateway at a GlanceLED Description Installing Your Adsl Router Log into Your Adsl Router Setting Up Your Adsl RouterQuick Start Quick Start Setup For Advance UserWide Area Network Connection Configuring the WANLocal Area Network Connection Bridged Gateway Profile and Connection New ConnectionPPPoA Connection Setup PPPoE Connection Setup Dhcp Connection Setup Static Connection Setup Page Modem Setup Configuring the LANModify an Existing Connection Enable/Disable Dhcp Static IP Address Assignment Changing the Adsl Router IP AddressAdvanced For Advance User Only Firewall/NAT ServicesUPnP UPnP Port ForwardingAdvanced Security Enable Web from WAN DMZ ConfigurationEnable Remote Telnet MAC Address Filters Access ControlEnable Incoming Icmp Ping LAN ClientsMulticast Static Routing Dynamic Routing Tools System CommandsUser Management Update FirmwareNetwork Statistics StatusPing Test Modem TestProduct Information Connection StatusDhcp Clients Modem StatusDSL Link LED Continues To Blink And Does Not Stop Appendix a TroubleshootingAdsl Router Is Not Functional Can’t Connect To The Adsl RouterDSL Link LED Is Always Off Adsl Router Terms What Is a Firewall?