b.There are no restrictions on a host's location.
c.There are no restrictions on the number of members that may belong to a host group.
d.A host may belong to multiple host groups.
e.
Multicasting is useful when data needs to be sent to more than one other device. For instance, if one device is responsible for acquiring data that many other devices need, then multicasting is a natural fit. Note that using multicasting as opposed to sending the same data to individual devices uses less network bandwidth.
To enable Multicasting, click on Advanced and under Advanced, select Multicast. Figure 16 illustrates a typical Multicast configuration.
Figure 16 (Multicast)
The Apply button will temporarily save this connection. need to click on Save Settings (at the side of the page). Save All.
To make the change permanent, you At the system commands page, click on
4.6.8 Static Routing
If the ADSL router is connected to more than one network, you may need to set up a static route between them. A static route is a pre
The New Destination IP is the address of the remote LAN or host to which you want to assign a static route. Enter the IP address of the host for which you wish to create a static route here. For a standard Class C IP domain, the network address is the first three fields of the New Destination IP, while the last field should be 0. The Subnet Mask identifies which portion of an IP address is the network portion, and which portion is the host portion. For a full Class C Subnet, the Subnet
- 26 -