To clone your network adapter’s MAC address onto the Router and avoid calling your ISP to change the registered MAC address, follow these instructions.
1.Select Enable.
2.Enter your adapter's MAC address in the MAC Address field.
3.Click the Apply button.
To disable MAC address cloning, keep the default setting, Disable.
Remote Management: This feature allows you to manage your Router from a remote location, via the
Internet. To disable this feature, keep the default setting, Disable. To enable this feature, select Enable, and use the specified port ( default is 8080) on your PC to remotely manage the Router. You should also change the Router’s default password, if you haven’t already done so. A unique password will increase security.
To remotely manage the Router, enter http://xxx.xxx.xxx.xxx:8080 (the x’s represent the Router’s Internet IP address, and 8080 represents the specified port) in your web browser’s address field. You will be asked for the Router’s password. After successfully entering the password, you will be able to access the Router’s
Note: If the Remote Management feature is enabled, anyone who knows the Router’s Internet IP address and password will be able to alter the Router’s settings.
MTU: MTU is the Maximum Transmission Unit. It specifies the largest packet size permitted for Internet transmission. Keep the default setting, Auto, to have the Router select the best MTU for your Internet connection, To specify a MTU size, select Manual, and enter the value desired (default is 1400). You should leave this value in the 1200 to 1500 range.
Log: The Router can keep logs of all incoming or outgoing traffic for your Internet connection. This feature is disabled by default. To keep activity logs, select Enable.
To keep a permanent record of activity logs as a file on your PC’s hard drive, Log viewer software must be used. In the Send Log to field, enter the fixed IP address of the PC running the Log viewer software. The Router will send updated logs to that PC.
To see a temporary log of the Router’s most recent incoming traffic, click the Incoming Access Log button. To see a temporary log of the Router’s most recent outgoing traffic, click the Outgoing Access Log button.
Click the Apply button to save the setting.
Alloy Wireless 802.11g User’s Guide | www.alloy.com.au | 13 |