Alloy Computer Products WLF2454AP-S manual Alloy Wireless 802.11g User’s Guide

Page 21

Fragmentation Threshold: This value specifies the maximum size for a packet before data is fragmented into multiple packets. It should remain at its default setting of 2346. If you experience a high packet error rate, you may slightly increase the Fragmentation Threshold. Setting the Fragmentation Threshold too low may result in poor network performance. Only minor modifications of this value are recommended.

AP Mode or Wireless Bridge Mode: The WLF2454AP-S can operate in two modes. When AP Mode is selected, the device operates as a normal Access Point.

Wireless Bridge Mode enables communication with another AP Router to bridge 2 or more LANS over a wireless connection.

* Click Apply to save your settings.

Alloy Wireless 802.11g User’s Guide

www.alloy.com.au

20

Image 21

Contents Version Wireless LAN 802.11g Series WLF-2454AP-STroubleshooting Introduction Safety Notification LED Status Turn on Power Supply Automatic Configuration Dhcp Static IP SetupUser Name and Password PPPoE ir Pptp Default Gateway Static IP or PptpInternet IP Address and Subnet Mask Static IP or Pptp DNS Domain Name Server or Pptp IP Address4GHz Settings Security Alloy Wireless 802.11g User’s Guide System To upgrade the Router’s firmwareClick More Info For Windows 98 and MillenniumAlloy Wireless 802.11g User’s Guide Dhcp Alloy Wireless 802.11g User’s Guide Snmp Status Advanced Wireless Authentication Type Alloy Wireless 802.11g User’s Guide Filters Internet Access PolicySummary ICMP, UDP, TCP, or UDP & TCPPort Forwarding Customized EnableApplications External Port TCP ProtocolRouting Delete This Entry Click the Delete This Entry button Ddns Ddns ServiceDynDNS.org TZO.comLAN Connection Problems I can’t access my AP Router My Wireless AP Router will not turn on. No LED’s light upBasic Functions Can’t connect to other computers on my LANAlloy Wireless 802.11g User’s Guide