Alloy Computer Products WLF2454AP-S manual Turn on Power Supply

Page 6

4 Web Management Settings

TURN ON POWER SUPPLY

A ‘Quick’ power cycle can cause the AP’s firmware to become corrupt. When powered on, be careful not to power the unit off again for at least 5 seconds, while data is being written to the flash.

START UP & LOGIN

In order to configure the Wireless 11g AP Router, you must use your web browser and manually enter http://192.168.1.1 into the Address box and press Enter. The Main Page will appear.

In order to configure the Wireless 11g AP Router, you must enter the password into the Password box and leave the User Name blank. The default password is “admin”.

Once you have logged-in as administrator, it is a good idea to change the administrator password to ensure the Wireless 11g AP Router is secure. The Security Settings section described later in this manual describes how to change the password.

Once you have entered the correct password and logged in, the screen will change to the Setup page screen.

Alloy Wireless 802.11g User’s Guide

www.alloy.com.au

5

Image 6

Contents Wireless LAN 802.11g Series WLF-2454AP-S VersionTroubleshooting Introduction Safety Notification LED Status Turn on Power Supply Setup Automatic Configuration Dhcp Static IPInternet IP Address and Subnet Mask Static IP or Pptp Default Gateway Static IP or PptpUser Name and Password PPPoE ir Pptp DNS Domain Name Server or Pptp IP Address4GHz Settings Security Alloy Wireless 802.11g User’s Guide To upgrade the Router’s firmware SystemFor Windows 98 and Millennium Click More InfoAlloy Wireless 802.11g User’s Guide Dhcp Alloy Wireless 802.11g User’s Guide Snmp Status Advanced Wireless Authentication Type Alloy Wireless 802.11g User’s Guide Internet Access Policy FiltersICMP, UDP, TCP, or UDP & TCP SummaryPort Forwarding Applications External Port EnableCustomized TCP ProtocolRouting Delete This Entry Click the Delete This Entry button DynDNS.org Ddns ServiceDdns TZO.comBasic Functions My Wireless AP Router will not turn on. No LED’s light upLAN Connection Problems I can’t access my AP Router Can’t connect to other computers on my LANAlloy Wireless 802.11g User’s Guide