2Wire 2701HGV-W manual Configuring the Internet Connection

Page 25

Appendix A: Install the Gateway on Other Operating Systems

6.Follow the on-screen instructions. When the driver installation is complete, you will be prompted to restart your computer.

7.After your computer restarts, connect the provided blue USB cable from the USB-PCport on the 2Wire gateway to your computer’s USB port.

8.Open the network Control Panel by selecting the Apple icon > Control Panel > TCP/IP.

9.Verify that “Connect Via: 2Wire USB Remote NDIS…” is selected to set the network adapter as active.

10.Click Save to complete your installation.

11.Proceed to “Configuring the Internet Connection” on page 22.

Configuring the Internet Connection

Now that your first computer is connected to the gateway, you need to configure your gateway to communicate with your Internet service provider.

To activate your Internet account:

1.Open your Internet browser.

2.Type http://gateway.2wire.net/setup into the browser’s address line.

3.When prompted to enter a key code, enter the key code provided by your Internet service in the key code field, and click NEXT.

4.Select your Local Time Zone and click NEXT.

5.You may be prompted to enter service provider information such as username and password. Enter any required service provider information and click NEXT.

6.The connection process will begin. During this process the INTERNET light on the front of the gateway will first blink green then turn solid green. This step could take up to five minutes as the gateway searches for your broadband service.

7.The gateway will now connect to the Internet. This process may take several minutes. If the registration screen opens, click the REGISTER button and complete the 2Wire registration process.

22

Page 24 Page 26
Image 25
Page 24 Page 26
Contents 2Wire Gateway Installation Guide Page Contents Getting Started Remove or Disable Conflicting ApplicationsCheck Your Computer’s Browser and System Requirements Browser RequirementsConnect the First Computer to the Gateway Install the DSL FilterChoose a Computer and Connection Type For Wall-Mounted Phones Check Your Connections Ethernet ConnectionGateway Connected Via Wireless Wireless ConnectionLocating the Serial Number and Wireless Encryption Key Non-2Wire Wireless Adapter ConfigurationGateway Connected Via USB USB ConnectionInstall the 2Wire Gateway USB Driver Macintosh Install the 2Wire Gateway USB Driver WindowsWindows XP/2K/ME/98SE Run the 2Wire Setup WizardMacintosh OS 10.1.4/10.1.5/10.2.0 10.2.8/10.3.3 Add Computers to the Network Gateway Connected to Second Computer Via Ethernet Gateway Connected to Second Computer Via USB Gateway Connected to Second Computer Via Wireless Understanding Broadband Redirect Messages DiagnosticsExcessive Sessions Warning Invalid Customer Information PPPNo DSL Connection Unable to Train Intermittent Connection Issue Uncanceled EchoBroadband Link is Currently Not Available Connection Error Provision Gateway Router Behind Router DetectedOFF Understanding the Indicator LightsGateway has been unable to detect a DSL signal Gateway Connected Via Ethernet Macintosh Appendix a Install the Gateway on Other Operating SystemsGateway Connected Via USB Macintosh Configuring the Internet Connection Electrical Regulatory InformationRegulatory Information MPE/SAR Labeling PTC General Warning

2701HGV-W specifications

The 2Wire 2701HGV-W is a multifaceted gateway designed to meet the demands of home and small office environments by providing both DSL and broadband connectivity through robust performance. This device is particularly popular among internet service providers and consumers for its reliability and versatility.

One of the main features of the 2Wire 2701HGV-W is its ability to serve as an Integrated Access Device (IAD), combining a DSL modem, a router, and a firewall in a single unit. This all-in-one design helps simplify the installation process as users don't need to purchase separate components. The DSL modem supports ADSL and ADSL2+, allowing for high-speed internet access while maintaining compatibility with various DSL technologies.

In terms of network connectivity, the 2701HGV-W boasts four Ethernet ports for wired connections, enabling multiple devices to connect directly to the router. For wireless connectivity, it supports 802.11g and 802.11b Wi-Fi standards, providing the ability to connect a range of devices wirelessly. The Wi-Fi performance is enhanced with features like Wi-Fi Protected Access (WPA) and Wired Equivalent Privacy (WEP), ensuring secure connections.

Another significant characteristic is its firewall capabilities, which help protect the local network from external threats. The built-in Stateful Packet Inspection (SPI) firewall provides an additional layer of security by analyzing incoming and outgoing packets to detect potential threats. Users can also configure parental controls and access restrictions, allowing them to manage which sites can be accessed on their network.

The 2Wire 2701HGV-W is designed with user-friendliness in mind. The web-based interface makes it easy for users to set up and customize their network settings. Additionally, the device supports Quality of Service (QoS), enabling users to prioritize certain types of traffic, such as video streaming or online gaming, ensuring a seamless experience even when multiple devices are connected.

Overall, the 2Wire 2701HGV-W is a versatile and robust networking solution that combines essential features such as DSL connectivity, wired and wireless networking options, and security protocols. Its user-friendly design and integrated capabilities make it an excellent choice for individuals and small businesses looking for a reliable internet gateway. Whether for casual browsing, remote work, or streaming, this device meets various connectivity needs efficiently.
Top Page Image Contents