2Wire 2701HGV-W manual Non-2Wire Wireless Adapter Configuration

Page 9

Connect the First Computer to the Gateway

Non-2Wire Wireless Adapter Configuration

Locating the Serial Number and Wireless

Encryption Key

The serial number of your 2Wire gateway is used as the network name (SSID). Beneath the serial number is a ten-digit number which is used as the encryption key. These are located on the bottom of your gateway (shown in horizontal orientation). You will need this information to configure your wireless adapter.

Configuring the Adapter

1.Install and configure your wireless adapter according to the manufacturer’s instructions.

2.Use the network adapter configuration software or Windows network connection wizard to set the network name (SSID) and encryption key (WEP).

a.The network name is the word “2WIRE” (in all capital letters), followed by the last three digits of the gateway serial number (for example, 2WIRE110).

b.The encryption key is a 64-bit hex value, located beneath the bar code on the bottom of the 2Wire gateway. In the example, it is 4119627022.

c.For Mac OS X users, you may need to enter the “$” character at the beginning of the encryption key (for example, $4119627022).

6

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 2Wire Gateway Installation Guide Page Contents Getting Started Remove or Disable Conflicting ApplicationsCheck Your Computer’s Browser and System Requirements Browser RequirementsInstall the DSL Filter Connect the First Computer to the GatewayChoose a Computer and Connection Type For Wall-Mounted Phones Check Your Connections Ethernet ConnectionGateway Connected Via Wireless Wireless ConnectionLocating the Serial Number and Wireless Encryption Key Non-2Wire Wireless Adapter ConfigurationGateway Connected Via USB USB ConnectionInstall the 2Wire Gateway USB Driver Macintosh Install the 2Wire Gateway USB Driver WindowsRun the 2Wire Setup Wizard Windows XP/2K/ME/98SEMacintosh OS 10.1.4/10.1.5/10.2.0 10.2.8/10.3.3 Add Computers to the Network Gateway Connected to Second Computer Via Ethernet Gateway Connected to Second Computer Via USB Gateway Connected to Second Computer Via Wireless Understanding Broadband Redirect Messages DiagnosticsExcessive Sessions Warning Invalid Customer Information PPPNo DSL Connection Unable to Train Intermittent Connection Issue Uncanceled EchoBroadband Link is Currently Not Available Connection Error Provision Gateway Router Behind Router DetectedOFF Understanding the Indicator LightsGateway has been unable to detect a DSL signal Gateway Connected Via Ethernet Macintosh Appendix a Install the Gateway on Other Operating SystemsGateway Connected Via USB Macintosh Configuring the Internet Connection Electrical Regulatory InformationRegulatory Information MPE/SAR Labeling PTC General Warning

2701HGV-W specifications

The 2Wire 2701HGV-W is a multifaceted gateway designed to meet the demands of home and small office environments by providing both DSL and broadband connectivity through robust performance. This device is particularly popular among internet service providers and consumers for its reliability and versatility.

One of the main features of the 2Wire 2701HGV-W is its ability to serve as an Integrated Access Device (IAD), combining a DSL modem, a router, and a firewall in a single unit. This all-in-one design helps simplify the installation process as users don't need to purchase separate components. The DSL modem supports ADSL and ADSL2+, allowing for high-speed internet access while maintaining compatibility with various DSL technologies.

In terms of network connectivity, the 2701HGV-W boasts four Ethernet ports for wired connections, enabling multiple devices to connect directly to the router. For wireless connectivity, it supports 802.11g and 802.11b Wi-Fi standards, providing the ability to connect a range of devices wirelessly. The Wi-Fi performance is enhanced with features like Wi-Fi Protected Access (WPA) and Wired Equivalent Privacy (WEP), ensuring secure connections.

Another significant characteristic is its firewall capabilities, which help protect the local network from external threats. The built-in Stateful Packet Inspection (SPI) firewall provides an additional layer of security by analyzing incoming and outgoing packets to detect potential threats. Users can also configure parental controls and access restrictions, allowing them to manage which sites can be accessed on their network.

The 2Wire 2701HGV-W is designed with user-friendliness in mind. The web-based interface makes it easy for users to set up and customize their network settings. Additionally, the device supports Quality of Service (QoS), enabling users to prioritize certain types of traffic, such as video streaming or online gaming, ensuring a seamless experience even when multiple devices are connected.

Overall, the 2Wire 2701HGV-W is a versatile and robust networking solution that combines essential features such as DSL connectivity, wired and wireless networking options, and security protocols. Its user-friendly design and integrated capabilities make it an excellent choice for individuals and small businesses looking for a reliable internet gateway. Whether for casual browsing, remote work, or streaming, this device meets various connectivity needs efficiently.
Top Page Image Contents