2Wire 2701HGV-W manual Wireless Connection, Gateway Connected Via Wireless

Page 8

Connect the First Computer to the Gateway

Wireless Connection

Requires wireless-enabled notebook or a computer with an 802.11b/g wireless network adapter installed. Wireless adapters can be purchased from your service provider.

Note: Security of the 802.11g wireless connection associated with this 2Wire 2701HGV-W ADSL2+ Router is the customer’s responsibility. Telecom will take no responsibility for charges made to customer’s accounts due to poorly organized wireless security allowing unknown users to connect to the internet via this wireless router. Should this occur, do not complain to the Telecom Fault Service or Jetstream Helpdesk.

Figure 2. Gateway Connected Via Wireless

1.Connect the provided AC power adapter from the 2Wire gateway’s POWER port to an electrical outlet. The POWER light on the front of the gateway should be green.

2.Connect the provided gray telephone cable from the gateway’s PHONE LINE port to a telephone jack with DSL service.

3.Install your wireless adapter according to the manufacturer’s instructions (see note below).

Note: If you use a 2Wire wireless adapter (PC card or USB adapter) for wireless networking, the 2Wire CD automatically configures it to communicate with the gateway during setup. If you are NOT using a 2Wire wireless adapter, you must manually configure your adapter to communicate with the gateway using the information on page 6.

5

Page 7 Page 9
Image 8
Page 7 Page 9
Contents 2Wire Gateway Installation Guide Page Contents Remove or Disable Conflicting Applications Getting StartedCheck Your Computer’s Browser and System Requirements Browser RequirementsChoose a Computer and Connection Type Install the DSL FilterConnect the First Computer to the Gateway For Wall-Mounted Phones Ethernet Connection Check Your ConnectionsWireless Connection Gateway Connected Via WirelessNon-2Wire Wireless Adapter Configuration Locating the Serial Number and Wireless Encryption KeyUSB Connection Gateway Connected Via USBInstall the 2Wire Gateway USB Driver Windows Install the 2Wire Gateway USB Driver MacintoshMacintosh OS 10.1.4/10.1.5/10.2.0 10.2.8/10.3.3 Run the 2Wire Setup WizardWindows XP/2K/ME/98SE Add Computers to the Network Gateway Connected to Second Computer Via Ethernet Gateway Connected to Second Computer Via USB Gateway Connected to Second Computer Via Wireless Diagnostics Understanding Broadband Redirect MessagesExcessive Sessions Warning Invalid Customer Information PPPIntermittent Connection Issue Uncanceled Echo No DSL Connection Unable to TrainBroadband Link is Currently Not Available Connection Error Router Behind Router Detected Provision GatewayUnderstanding the Indicator Lights OFFGateway has been unable to detect a DSL signal Appendix a Install the Gateway on Other Operating Systems Gateway Connected Via Ethernet MacintoshGateway Connected Via USB Macintosh Configuring the Internet Connection Regulatory Information ElectricalRegulatory Information MPE/SAR Labeling PTC General Warning

2701HGV-W specifications

The 2Wire 2701HGV-W is a multifaceted gateway designed to meet the demands of home and small office environments by providing both DSL and broadband connectivity through robust performance. This device is particularly popular among internet service providers and consumers for its reliability and versatility.

One of the main features of the 2Wire 2701HGV-W is its ability to serve as an Integrated Access Device (IAD), combining a DSL modem, a router, and a firewall in a single unit. This all-in-one design helps simplify the installation process as users don't need to purchase separate components. The DSL modem supports ADSL and ADSL2+, allowing for high-speed internet access while maintaining compatibility with various DSL technologies.

In terms of network connectivity, the 2701HGV-W boasts four Ethernet ports for wired connections, enabling multiple devices to connect directly to the router. For wireless connectivity, it supports 802.11g and 802.11b Wi-Fi standards, providing the ability to connect a range of devices wirelessly. The Wi-Fi performance is enhanced with features like Wi-Fi Protected Access (WPA) and Wired Equivalent Privacy (WEP), ensuring secure connections.

Another significant characteristic is its firewall capabilities, which help protect the local network from external threats. The built-in Stateful Packet Inspection (SPI) firewall provides an additional layer of security by analyzing incoming and outgoing packets to detect potential threats. Users can also configure parental controls and access restrictions, allowing them to manage which sites can be accessed on their network.

The 2Wire 2701HGV-W is designed with user-friendliness in mind. The web-based interface makes it easy for users to set up and customize their network settings. Additionally, the device supports Quality of Service (QoS), enabling users to prioritize certain types of traffic, such as video streaming or online gaming, ensuring a seamless experience even when multiple devices are connected.

Overall, the 2Wire 2701HGV-W is a versatile and robust networking solution that combines essential features such as DSL connectivity, wired and wireless networking options, and security protocols. Its user-friendly design and integrated capabilities make it an excellent choice for individuals and small businesses looking for a reliable internet gateway. Whether for casual browsing, remote work, or streaming, this device meets various connectivity needs efficiently.
Top Page Image Contents