2Wire 2700HG-D, 2701HG-T, 2700HGB, 2701HG-B, 2701HG-S Install the 2Wire Gateway USB Driver Windows

Page 11

Connect the First Computer to the Gateway

Install the 2Wire Gateway USB Driver - Windows

1.Power on your computer and place the 2Wire CD in your computer’s CD-ROM drive.

2.If the Add Hardware Wizard displays, follow the on-screen instructions. If prompted to identify where to search for drivers, deselect Floppy Disk drive and check CD-ROM drive.

3.After the driver installs click Finish to complete the driver installation. The Setup Wizard will resume when your PC has rebooted.

Note: Microsoft Windows 98 users may be prompted to insert the Windows 98 installation CD-ROM after installing the 2Wire gateway USB drivers. After the Windows 98 updates are complete, remove the Windows 98 CD and reinsert the 2Wire CD into your CD-ROM prior to rebooting your PC.

Install the 2Wire Gateway USB Driver - Macintosh

Note: The 2Wire gateway supports USB for Macintosh OS 8.6, 9.2, 10.1.4, 10.1.5, 10.2.0, 10.2.1 to 10.2.6, 10.3.3 to 10.3.9, 10.4.0, and 10.4.1.

Before making your USB connection to the gateway, you must install the 2Wire gateway USB driver on your computer. The following instructions are for USB installation on Macintosh computers running OS 10.2.

1.Power on your computer and place the 2Wire CD in your computer’s CD-ROM drive.

2.Double-click the 2Wire CD icon on your desktop.

3.Double-click 2Wire USB to begin the driver installation.

4.If you have set up an administrator name and password, the Authenticate screen opens. Enter your administrator name and password and click OK.

5.Follow the on-screen instructions. When the driver installation is complete, you will be prompted to restart your computer.

6.After your computer restarts, connect the provided blue USB cable from the USB port on the 2Wire gateway to your computer’s USB port.

Check Your Connections

With your computer completely started, verify the POWER and USB indicator lights on the front of the 2Wire gateway are green. If they are not, see “Understanding the Indicator Lights” on page 18. The INTERNET

indicator light will not turn green until the gateway software has been installed and an Internet connection has been established.

8

Page 10 Page 12
Image 11
Page 10 Page 12
Contents 2Wire Gateway Installation Guide Page Contents Browser Requirements Remove or Disable Conflicting ApplicationsGetting Started Check Your Computer’s Browser and System RequirementsChoose a Computer and Connection Type Install the DSL FilterConnect the First Computer to the Gateway For Wall-Mounted Phones Check Your Connections Ethernet ConnectionGateway Connected Via Wireless Wireless ConnectionLocating the Serial Number and Wireless Encryption Key Non-2Wire Wireless Adapter ConfigurationGateway Connected Via USB USB ConnectionInstall the 2Wire Gateway USB Driver Macintosh Install the 2Wire Gateway USB Driver WindowsMacintosh OS 10.1.4/10.1.5/10.2.0 10.2.8/10.3.3 Run the 2Wire Setup WizardWindows XP/2K/ME/98SE Add Computers to the Network Gateway Connected to Second Computer Via Ethernet Gateway Connected to Second Computer Via USB Gateway Connected to Second Computer Via Wireless Invalid Customer Information PPP DiagnosticsUnderstanding Broadband Redirect Messages Excessive Sessions WarningNo DSL Connection Unable to Train Intermittent Connection Issue Uncanceled EchoBroadband Link is Currently Not Available Connection Error Provision Gateway Router Behind Router DetectedOFF Understanding the Indicator LightsDiagnostics DSL Light Operating State Gateway Connected Via Ethernet Macintosh Appendix a Install the Gateway on Other Operating SystemsGateway Connected Via USB Macintosh Configuring the Internet Connection Regulatory Information Regulatory Information
Top Page Image Contents