Add Computers to the Network
Wireless Connection
Requires a computer with an 802.11b/g wireless network adapter installed. Wireless adapters are purchased separately from the 2Wire gateway.
Note: The 2Wire 2070 and 2070V gateways do not include wireless support. If you are using a 2Wire 2070 or 2070V gateway, skip this section.
Figure 6. Gateway Connected to Second Computer Via Wireless
Note: If you use a 2Wire wireless adapter (PCI, PC card, or USB adapter) for wireless networking, the gateway installation software automatically configures it to communicate with the gateway during setup.
If you are NOT using a 2Wire wireless adapter, you must manually configure your adapter to communicate with the gateway using the information on page 6.
1.Install your wireless adapter according to the manufacturer’s instructions (see note above).
2.Repeat “Run the 2Wire Setup Wizard” on page 9.
13