Olympus WS 550 M, WS 450 S manual Power supply, This recorder cannot charge rechargeable batteries

Page 11

Power supply

"For WS-450S:

This recorder cannot charge rechargeable batteries.

3Close the battery cover

completely by pressing to the direction A, then sliding to the direction B.

If the “hour” indicator flashes in the display, see “Setting time and date [Time & Date]” (P.15).

Battery indicator

The battery indicator on the display changes as the batteries loose power.

8{9{:

When [:] appears on the display, replace the batteries as soon as possible. When

the batteries are too weak, [] and

[Battery Low] appears on the display and the recorder shuts down.

Be sure to stop the recorder before replacing the batteries. Unloading the batteries while the recorder is in use may cause a malfunction such as corrupting the file, etc. If you are recording into a file and the batteries run out, you will loose your currently recorded file because the file header will not be able to close. It is crucial to change the batteries once you see only one Hash mark in the battery indicator.

If it takes longer than 1 minute to replace the dead batteries or if you take the batteries in and out repeatedly at short intervals, you may have to reset the time when you have loaded fresh batteries (P.15).

Remove the batteries if you are not going to use the recorder for an extended period of time.

When playing a voice/music file, the recorder may be reset due to the reduction of the voltage output of the

batteries depending on the volume level even if [8] is displayed in the battery indicator. In this case, lower the volume of the recorder.

When replacing rechargeable batteries, be sure to use Ni-MH rechargeable batteries (optional). The use of other manufacturers' products can damage the recorder and should be avoided.

1

Power supply

Notes

Manganese batteries may not be used in this recorder.

When changing batteries, AAA alkaline batteries or Olympus Ni-MH rechargeable batteries are recommended.

11

Image 11
Contents Digital Voice Recorder Detailed Instructions Trademarks and registered trademarks IntroductionTable of contents Avoid strong vibrations or shocks General PrecautionsSafe and proper usage BatterriesKeep batteries out of the reach of children Safe and proper usageIt has built-in SRS WOW XT P , P Main featuresMain features It has a backlight full-dot display LCD panel PFor WS-560M, WS-550M only For WS-450S only Identification of parts For WS-560M/WS-550M Identification of parts Display LCD panel Identification of partsFile display During playback modeWhen Voice mode is selected FolderInserting batteries Identification of parts Power supplyThis recorder cannot charge rechargeable batteries Power supplyPower supply Battery indicatorBoot the PC Charging by connecting to a computer via USBTurning on/off the power Power supply/HOLD Power supply HoldPress the + or − button to set HOLD/Setting time and date Time & DateHOLD/Setting time and date Press the 9or 0button to select the item to setChanging the time and date Setting time and date Time & DateVoice mode and Music mode Voice mode and Music modeSlide the mode switch to Voice position Slide the mode switch to Music positionAbout the folders for voice recordings 002 003 004 200 Precautions for transferring Music filesAbout the folder for music playback MusicSelecting the folders and files Selecting the folders and filesPress the STOP4button to stop recording RecordingSelect the recording folder P.18 to P.20 Press the RECsbutton to start recordingPause RecordingConnect the earphone to the EAR jack on the recorder Press the RECsbutton againMicrophone sensitivity Microphone sensitivity is adjustable to meet recording needsCondition Recommended settings by recording conditionRecording Channel microphone omni- directional ME30W Recording with external microphoneTie clip microphone omni-directional ME15 Stereo microphone ME51SRecording the sound of other devices with this recorder Playback Volume can be adjusted within a range from 00 toPlayback Press the OK `button to start playbackRewinding PlaybackButton ForwardingPlayback through earphone When Skip Space set to other thanSettings relating to playback Recorder skips to the beginning of the previous fileMPEG2 Layer3 About music fileErased.31 Setting an index mark or a temp markHow to begin segment repeat playback Playback Press the 0button Press the RECsbuttonPress the 9button Want to erase ErasingTo erase P.18 to P.20 For WS-450S only ErasingErasing For WS-560M, WS-550M onlyMenu will appear on the display Menu setting methodMoves to the setting of the selected item 4Setting menu during playback Menu setting method4Setting menu during recording Rec Menu +File MenuVcva level can be set to any of 15 different values Press the 9or 0button adjust the start/stop actuation levelLow Cut Filter Voice Filter Noise CancelPlay Menu Select SRS 3D or TruBassSelect the frequency band Adjust the surround level or bass effect levelSelect the desired equalizer characteristics Select the desired playback mode Select Repeat or RandomRestrictions on double speed playback Menu setting method For WS-560M/WS-550MPlay Speed Normal playback Playback at normal speedSet the brightness LCD/Sound MenuSelect Forward Skip or Reverse Skip Set the skip space Select Lighting Time or Brightness Set the lighting timeDevice Menu Initial settingsCursor will flash to confirm that the file can be moved Press the OK `button button to complete the settingMenu setting method Press the OK `or 9button Rearranging files ReplaceFormat will appear on the display Press the + button to select Start Menu setting methodPress the + button again to select Start Menu setting method Compatible PC’s Operating environmentWindows Operating SystemOperating environment Windows Connecting to your PCConnecting to your PC Boot the PC Connect to the PCs USB port or to a USB hubDisconnecting from your PC Connecting to your PCTransfer the voice files to your PC Connecting the recorder to your PC P.50Windows Media Player Using Windows Media Player1Features taskbar 2Seek slider Window namesCopying music from CD Using Windows Media PlayerTransferring music file to the recorder Set Up Sync, and set as followsRecorder is recognized as a Removable Disk Click Start SyncFile is transferred to the recorder Device Click Start Burn When Data CD is selectedCopying voice file to the CD PlayerBurn menu Click Start Burn Using Windows Media PlayerUsing iTunes Using iTunesSetting Using iTunesClick Import CD Using iTunes Import UsingConnect the recorder to a PC, and start iTunes Click Burn Disc Using iTunes Using as external memory of the PC Message Meaning Explanation Action Alarm message listSymptom Probable cause Action TroubleshootingFolders TroubleshootingTechnical assistance and support Accessories optionalSpecifications Guide to battery life SpecificationsWS-560M/WS-550M Voice mode WS-450S WS-560M/WS-550M Music modeFor customers in Europe