Olympus WS 550 M, WS 450 S, WS-560M manual Recording the sound of other devices with this recorder

Page 26

Recording

2

Recording

Recording the sound of other devices with this recorder:

The sound can be recorded when connecting to the audio output terminal (earphone jack) of the other device, and the MIC jack of the recorder with the connecting cord KA333 (optional) for dubbing.

 

 

To audio output

To MIC

 

 

terminal of other

jack

 

 

devices

 

 

 

 

 

Recording the sound of this recorder with other devices:

The sound of this recorder can be recorded to other devices when connected to the audio input terminal (microphone jack) of other devices and the EAR jack of this recorder, with the connecting cord KA333 (optional) for dubbing.

To EAR

jack

To audio input

terminal of

other devices

Note

The detailed input levels cannot be adjusted with this recorder. When external devices are connected, perform a test recording and then adjust the output level for the external devices.

Note

When you adjust the various sound quality settings related to playback on the recorder, the audio output signal sent out from the EAR jack will change as well (P.36, P.40, P.41).

26

Image 26
Contents Digital Voice Recorder Detailed Instructions Introduction Trademarks and registered trademarksTable of contents Batterries General PrecautionsSafe and proper usage Avoid strong vibrations or shocksSafe and proper usage Keep batteries out of the reach of childrenIt has a backlight full-dot display LCD panel P Main featuresMain features It has built-in SRS WOW XT P , PIdentification of parts For WS-560M, WS-550M only For WS-450S onlyIdentification of parts Identification of partsDisplay LCD panel For WS-560M/WS-550MFolder During playback modeWhen Voice mode is selected File displayIdentification of parts Power supply Inserting batteriesBattery indicator Power supplyPower supply This recorder cannot charge rechargeable batteriesCharging by connecting to a computer via USB Boot the PCTurning on/off the power Power supply Hold Power supply/HOLDPress the 9or 0button to select the item to set HOLD/Setting time and date Time & DateHOLD/Setting time and date Press the + or − button to setSetting time and date Time & Date Changing the time and dateSlide the mode switch to Music position Voice mode and Music modeSlide the mode switch to Voice position Voice mode and Music modeAbout the folders for voice recordings Music Precautions for transferring Music filesAbout the folder for music playback 002 003 004 200Selecting the folders and files Selecting the folders and filesPress the RECsbutton to start recording RecordingSelect the recording folder P.18 to P.20 Press the STOP4button to stop recordingPress the RECsbutton again RecordingConnect the earphone to the EAR jack on the recorder Pause Microphone sensitivity is adjustable to meet recording needs Microphone sensitivityCondition Recommended settings by recording conditionRecording Stereo microphone ME51S Recording with external microphoneTie clip microphone omni-directional ME15 Channel microphone omni- directional ME30WRecording the sound of other devices with this recorder Press the OK `button to start playback Volume can be adjusted within a range from 00 toPlayback PlaybackForwarding PlaybackButton RewindingRecorder skips to the beginning of the previous file When Skip Space set to other thanSettings relating to playback Playback through earphoneAbout music file MPEG2 Layer3Setting an index mark or a temp mark Erased.31How to begin segment repeat playback Playback Press the 0button Press the RECsbuttonPress the 9button Want to erase ErasingTo erase P.18 to P.20 For WS-560M, WS-550M only ErasingErasing For WS-450S onlyMenu will appear on the display Menu setting methodMoves to the setting of the selected item 4Setting menu during playback Menu setting method4Setting menu during recording +File Menu Rec MenuVcva level can be set to any of 15 different values Press the 9or 0button adjust the start/stop actuation levelLow Cut Filter Select SRS 3D or TruBass Noise CancelPlay Menu Voice FilterSelect the desired playback mode Select Repeat or Random Adjust the surround level or bass effect levelSelect the desired equalizer characteristics Select the frequency bandNormal playback Playback at normal speed Menu setting method For WS-560M/WS-550MPlay Speed Restrictions on double speed playbackSelect Lighting Time or Brightness Set the lighting time LCD/Sound MenuSelect Forward Skip or Reverse Skip Set the skip space Set the brightnessInitial settings Device MenuRearranging files Replace Press the OK `button button to complete the settingMenu setting method Press the OK `or 9button Cursor will flash to confirm that the file can be movedFormat will appear on the display Press the + button to select Start Menu setting methodPress the + button again to select Start Menu setting method Operating System Operating environmentWindows Compatible PC’sOperating environment Connect to the PCs USB port or to a USB hub Connecting to your PCConnecting to your PC Boot the PC WindowsConnecting to your PC Disconnecting from your PCConnecting the recorder to your PC P.50 Transfer the voice files to your PCWindow names Using Windows Media Player1Features taskbar 2Seek slider Windows Media PlayerUsing Windows Media Player Copying music from CDSet Up Sync, and set as follows Transferring music file to the recorderRecorder is recognized as a Removable Disk Click Start SyncFile is transferred to the recorder Device Player When Data CD is selectedCopying voice file to the CD Click Start BurnClick Start Burn Using Windows Media Player Burn menuUsing iTunes Using iTunesImport Using Using iTunesClick Import CD Using iTunes SettingConnect the recorder to a PC, and start iTunes Click Burn Disc Using iTunes Using as external memory of the PC Alarm message list Message Meaning Explanation ActionTroubleshooting Symptom Probable cause ActionTroubleshooting FoldersAccessories optional Technical assistance and supportSpecifications WS-560M/WS-550M Music mode SpecificationsWS-560M/WS-550M Voice mode WS-450S Guide to battery lifeFor customers in Europe