Recording
Notes | To quickly check on the recorded contents |
2
Recording
•To ensure recording from the beginning, start speaking after you see the recording indicator light on.
•When remaining recording time is less than 60 seconds, the recording indicator light starts flashing. When the recording time is decreasing to 30 or 10 seconds, the light flashes faster.
•[Folder Full] will appear when the recording cannot be made any further. Select on other folder or delete any unnecessary files before recording (☞P.34).
•[Memory Full] will appear when the memory is full. Delete any unnecessary files before recording any further (☞ P.34).
Pause
While the recorder is during recording mode, press the RECs button.
While the recorder is during recording mode, press the OK ` button.
•[6] will appear on the display.
•Stop recording and the file that was just recorded will be played back.
Listening while audio is recorded
If you start recording after inserting the earphone into the EAR jack on the recorder, you can hear the sound being recorded. The recording monitor volume can be adjusted by pressing the + or − button.
Connect the earphone to the EAR jack on the recorder.
•[5] will appear on the display.
•The recorder will time out after 60 minutes when left in “Rec Pause”.
Resume Recording:
Press the RECsbutton again.
•Recording will resume at the point of interruption.
To EAR jack
•After recording has started, you can hear the sound being recorded through the earphone.
22