Sony Ericsson GC75 Dial during dial-up, All Windows Operating Systems Error 734 The PPP link

dial during dial-up

within an appropriate time. This can be caused by poor line quality or a problem with the server (ISP). This error can occur when your modem has connected to the ISP and has sent a username and password, but there is no response from the server. Wait a few minutes and try again

All Windows® Operating Systems

Error 734: The PPP link	The APN entry is incorrect, the signal is weak or the
control protocol was	connection is lost whilst dialing. See the support section
terminated during dial-up	on www.mobility.com.pk site for a full list of network
	operator APNs.
Error 678:	Either: Service is not supported by SIM (usually for
Computer you are dialing	CSD/HSCSD) or the computer is not answering. Check
is not responding during	SIM settings with your service provider if necessary. Make
dial-up	sure that the server you are dialing is OK. If you are
	unsure which speed to choose from the Speed tab, start
	with Analogue 9600, and check to see if it works. Once
	your connection works on Analog, you can try the
	V110/V120 settings to see if faster speeds are available.
	V110/V120 also connects faster than analog. When
	roaming you may need to repeat this procedure to adapt
	your settings to the capability of the local network
	operator.
Connection Failed or	No specific reason for failure is available. Wait a few
Activation Failed.	minutes and try again. If you continue to get this error
Please contact your	check your connection settings or call your service
Service Provider.	provider for help.
Connection Failed. Invalid	The APN entry is incorrect, the signal is weak or the
APN. Please check and	connection is lost whilst dialing. See the support section
enter the APN again.	on www.SonyEricsson.com site for a list of network
	operator APNs or contact your service provider.
Connection Failed. Invalid	Choose to modify your connection in the Connection
User Name or Password.	Wizard. Go to the User ID screen and re enter the User
Please check and enter	Name and Password given to you by your service
the User Name and/or	provider. If you were not supplied with a User Name and
Password in your	Password leave the fields blank. Contact your service
connection profile.	provider if you continue to have problems.
Connection Failed. Invalid	Your service provider doesn't recognize you. Check the
Profile. Please check and	setting you have entered to create your connection. If you
re-enter your connection	still get the error contact your service provider and check
profile information, and	you have GPRS Internet enabled on your subscription and

19