Installing the Software

If the antenna is obstructing your use of the keyboard you can turn it to a horizontal position and still connect to the network. If you want to use your other PC card port remove the GC75 whilst you insert the other card.

When GC75 isn't in use it is recommended that you store it in the protective carrier ox provided. The unit, especially the antenna could be damaged if it remains in PC.

1.Insert the GC75 Manager CD-ROM in your CD drive. After a few seconds a Connect Console splash screen is displayed.

Note:

If the CD-ROM does not autorun, select Start Run and type D:\Setup.bat into the Run dialog. (Where D is your CD drive.)

2.The Install Shield Wizard for Mobilink Connect Console opens; follow the Instructions on screen. When installation is complete click Finish.

3.The Setup first installs the Sony Ericsson GC75 driver and then installs Mobilink Connect Console 75.

4.Insert the GC75 PC Card. Make sure the GC75 is fully inserted.

5.Your PC recognizes that new hardware has been inserted and installs the necessary driver. This process will happen twice as two hardware drivers need to be installed. The process will take a few seconds. The New Hardware Wizard may require you to locate a specific driver file. If this happens a dialog opens, click Browse and select D:\Driver9x (where D is your CD drive) on a Windows 98 machine or D:\Driver2k (where D is your CD drive) on a Windows 2000/XP