JVC HM-DH30000U manual 24 EN, Automatic operations after, Locating beginning, Start search

24 EN BASIC PLAYBACK AND RECORDING (cont.)

J

VCR TV CABLE/DBS

F –b

1 2 3

4 5 6

7 8 9

0 F –C

F –a

I

F –a, b, c FF ( )

REW ( ) G

H

SHUTTLE ring

F Automatic operations after

rewinding — Next Function Memory

The Next Function Memory “tells” the VCR what to do after rewinding is complete.

●Ensure that the VCR is in stop mode.

a– For Automatic Playback Start

Press REW ( 1 ), then press PLAY ( 3 ) within 2 seconds.

b– For Automatic Power Off

Press REW ( 1 ), then press POWER within 2 seconds.

c– For Automatic Timer Standby

Press REW ( 1 ), then press TIMER within 2 seconds.

NOTE:

It is not possible to select the Automatic Timer Standby function if the cassette’s record safety tab is removed.

G Locating beginning of

recordings — Index Search

Index codes are placed on the tape at the beginning of each recording when recording on this VCR. You can find and automatically play back from the beginning of any recording using the Index Search function.

1 Start search

While the tape is not running, press 4 or ¢ on the Remote.

2 Access distant code

To access a recording of 2 to 9 index codes away, press 4 or ¢ repeatedly until the correct number is displayed on the screen (only if “SUPERIMPOSE” is set to “ON” ; ☞ pg. 56). Playback begins automatically when the desired recording is located.

Beginning of the current			Current position			Beginning of the 2nd next
program recorded			on the tape			program recorded
Previous				Next
program				program	2nd	next
recorded				recorded
–2	–1	1			2	3

4 ¢

●If you want to find the very beginning of the

desired program, press REW ( ) or FF ( ) or turn the SHUTTLE ring after playback starts.

NOTE:

An index code is not placed on the tape when recording is

resumed from recording pause.