EN 55
Input/Output settings [IN/OUT]
* The default setting is bold in the table below.
⬛ TV OUTPUT 1 | Select the apppropriate mode when playing back a | |
720to1080 | recording of an HD (High Definition) signal: | |
NO CONV. | 720to1080: 720p is | |
ALLto480i | ||
480p, and 480i image formats are output to the TV without | ||
| ||
| being converted. Select this when the 720p image played back | |
| is distorted. | |
| NO CONV.: 1080i, 720p, 480p, and 480i image formats are output to the | |
| TV just as they are. | |
| ALLto480i: All images will be output to the TV in 480i image format. |
|
| NOTE: |
|
|
|
| When you play back the picture of 1080i, 720p, 480p image format, the signal is not |
| |
|
| output from the |
| |
|
|
|
| |
| ⬛ TV OUTPUT 2 | Select the apppropriate mode depending on the type of TV you have. |
| |
| WIDE16:9 | WIDE16:9: | Select this for a wide TV set with 16:9 screen image size. |
|
| NORM4:3 |
| ||
| NORM4:3: | Select this for a TV set with 4:3 screen image size. |
| |
|
|
| ||
|
| NOTES: |
|
|
|
| ● When “TV OUTPUT 2” is set to “WIDE16:9”, sometimes the screen image may be |
| |
|
| stretched vertically. |
|
|
|
| ● When “TV OUTPUT 2” is set to “NORM4:3”, sometimes subtitles may not be visible or |
| |
|
| the ends of the screen image may be cut off. Normally select “WIDE16:9”. |
| |
|
| ● In order to let the equipment determine the screen image size, it is recommended that |
| |
|
| you connect the VCR and TV using the component video output connectors or S VIDEO |
| |
|
| OUT connector. |
|
|
|
| ATTENTION: |
|
|
|
| When recording by |
| |
|
| regardless of “TV OUTPUT 2” setting. |
| |
|
|
|
| |
| ⬛ FRONT AUX | You have to select which terminal — either VIDEO (composite) or |
| |
| VIDEO | separate signals) to use as the video input terminal on the front panel. |
| |
|
| Make sure to select the correct terminal; otherwise, you may fail in recording |
| |
|
|
| ||
|
| (editing) on this VCR. |
| |
|
|
|
| |
| ⬛ REAR AUX | You have to select which terminal — either VIDEO (composite) or S VIDEO (Y/C |
| |
| VIDEO | separate signals) to use as the video input terminal |
| |
|
|
|
| |
| Make sure you select the correct terminal; otherwise, you may fail in recording |
| ||
|
| (editing) on this VCR. |
| |
|
|
|
| |
| ⬛ REAR AUX | You have to select which terminal — either VIDEO (composite) or S VIDEO (Y/C |
| |
| VIDEO | separate signals) to use as the video input terminal |
| |
|
|
|
| |
| Make sure you select the correct terminal; otherwise, you may fail in recording |
| ||
|
| (editing) on this VCR. |
|